The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
ULT to Showcase Comprehensive Extraction and Filtration Solutions at productronica 2017
September 19, 2017 | ULT AGEstimated reading time: 1 minute
ULT AG will demonstrate its full range of extraction and filtration technologies for air purification within electronics manufacturing at the upcoming productronica 2017 show in Munich, Germany. The company will present solutions for the efficient and economic removal of airborne pollutants, such as laser fume, soldering fume, gases, vapors, dusts, and odors.
One focal point of ULT’s trade show appearance is the capture and filtration of easily inflammable or explosive dusts and air mixtures, which may occur during surface processing of hard to handle elements, e.g. titanium. The particularly developed safe economic fume extraction and filtration method is based on special filtration and capturing concepts.
Additionally, ULT will introduce the next development stage of its new device control, which allows for system remote control through LAN or WLAN via a webserver. Furthermore, users can read out specific device information, e.g. filter saturation state, performance figures, or the next maintenance date.
Utilizing extraction and filtration systems in electronics manufacturing is a statutory requirement. Companies should also be aware that employees, production equipment, and products must be protected from the impact of hazardous emissions. They are generated during the utilization of laser machines, soldering technology or throughout gluing and welding processes. ULT provides one of the most comprehensive range of turnkey and customized solutions – in particular for hard to purify fine dusts and particulates.
ULT will be in Hall A4, Stand 549.
About ULT AG
Founded in 1994, ULT AG is a leading vendor of high efficiency industrial air filtration systems and dust collectors. The broad range of equipment has been designed for use in many industries such as machine construction, electronics production and general manufacturing as well as medical, covering a wide range of applications. The product range offers standard products as well as custom-built units for special applications. ULT AG provides customers in Europe, Asia, North America and Australia with extraction and filtration systems for material processing by means of laser, soldering, welding etc. as well as onsite services. The company has been DIN EN ISO 9001 certified for more than 15 years. Additional information on ULT and its products can be found online at www.ult.de/en.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.