Share on:

Share on LinkedIn Share on X Share on Facebook Share with email

Suggested Items

Traditional Materials, High-Frequency Boards?

06/18/2024 | I-Connect007 Editorial Team
Not long ago, high-frequency and RF boards required specialized laminates, which tend to be costly and difficult to manufacture. But now, high-frequency designers use traditional PCB laminates for certain high-frequency boards. How is this possible? For some insight, we asked Ed Kelley, founder of Four Peaks Innovation and former CTO of Isola, to discuss how traditional materials have improved and what this means to PCB designers and design engineers today.

Aismalibar to Attend PCIM 2024

06/05/2024 | Aismalibar
Aismalibar will be attending PCIM 2024 in Nuremberg, Germany from June 11th to 13th, presenting new cooling technologies for power electronics, specifically Thermal Interface Materials (TIMs) and Insulated Metal Substrates (IMS). PCIM is the leading international exhibition and conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management.

The Sky's the Limit: A Day in the Life of PCB Designer Paul Brionez

06/04/2024 | Michelle Te, I-Connect007
Paul Brionez is a senior printed circuit board layout engineer for Wisk Aero LLC. He’s responsible for the layout of PCBs and the management of library parts being created to use in PCB assemblies. He’s also involved in the creation of processes and procedures to be used in the creation, management, and release/revision of PCBs and PCBAs used for Wisk Aero applications.

Beyond Design: Dielectric Material Selection Guide

05/23/2024 | Barry Olney -- Column: Beyond Design
Materials used for the fabrication of multilayer PCBs absorb high frequencies and reduce edge rates. That loss in the transmission line is a major cause of signal degradation. However, not all of us are designing cutting-edge boards and sometimes we tend to over-specify requirements that can lead to inflated production costs. In this month’s column, I will look at the types of materials commonly used for PCB design and how to select an adequate material to minimize costs.

Physicists Create Optical Component for 6G

05/20/2024 | Skoltech
A joint team of physicists from Skoltech, MIPT, and ITMO developed an optical component that helps manage the properties of a terahertz beam and split it into several channels.
Copyright © 2024 I-Connect007 | IPC Publishing Group Inc. All rights reserved. Log in