The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
AIM's Mehran Maalekian to Present at the LED A.R.T. Symposium
November 20, 2017 | AIM SolderEstimated reading time: 1 minute
AIM Solder R&D Director Dr. Mehran Maalekian will present the white paper "The Development of a Novel Solder Alloy to Improve LED Solder Interconnect Durability," at the LED Assembly, Reliability & Testing Symposium, scheduled to take place on November 28–30, 2017 at the Archie K. Davis Conference Center in Research Triangle Park, North Carolina.
The adoption of LED lighting technologies is rapid and widespread due to their efficiency, durability and design adaptability. However, these newer applications place increasing demands on functionality and reliability requirements. Dr. Maalekian’s paper explores failure mechanisms of common SAC alloys when exposed to high temperatures and studies the use of bismuth and micro-alloyed elements which have shown a dramatic improvement in the thermal and mechanical durability of solder interconnects in LED lighting applications.
Dr. Maalekian is experienced in materials engineering with a focus on physical metallurgy, soldering, modelling in materials engineering, metal forming and thermo-mechanical processes. Dr. Maalekian has received numerous recognitions including the National Sciences and Engineering Research Council of Canada Award, the International Henry Granjon Prize (IIW), and IWS-Sossenheimer Award. He has been awarded the honor of Speaker of Distinction by the Surface Mount Technology Association (SMTA). Dr. Maalekian has published many scientific and technical papers, serves as a reviewer of several scientific journals, and is on the editorial board of Science and Technology of Welding and Joining.
About AIM
Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, preforms, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, click here.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.