Dan’s Biz Bookshelf: ‘Believe in Better'
The Big Picture: Our Big ‘Why’ in the Age of AI
The Chemical Connection: Through-glass Vias in Glass Substrates
Microtek Laboratories China Completes First IPC-4101E Validation Services Test Program
November 22, 2017 | Microtek Laboratories ChinaEstimated reading time: 1 minute
Microtek Laboratories China has completed the first qualification testing program for IPC-4101 Validation Services for a Mainland Chinese manufacturer of copper-clad laminates and prepreg. The Qualification Testing for IPC-4101 Validation Services must be conducted at an IPC approved independent test lab. The product tested from Ventec International was the first copper-clad laminate material from Mainland China to be QPL-certified under the IPC Validation Services program for IPC-4101. The testing protocol followed the requirements of IPC-4101 for qualification specification sheet 41 for polyimide base materials.
From IPC-4101:
3.4 Qualification Testing: Laminate and prepreg base materials furnished under this specification shall be qualified as described in Table 3-1 for laminates and Table 3-2 for prepregs. The supplier shall retain on file, supporting data that the materials meet the requirements of this specification using the test methods described herein. Qualification testing shall be performed to demonstrate the supplier’s ability to meet all of the requirements of each applicable specification sheet for each base material.
The qualification tests for each base material included minimum performance characteristics such as peel strength after various conditioning steps, electrical performance, Dk/Df, physical properties, dimensional stability, moisture absorption, chemical resistance, and flammability.
According to Doug Sober, director for international sales & marketing, “This is the start of many qualification projects for IPC-4101 as high-end, base material suppliers attempt to separate their products from the rest of the commodity producers in Asia. As an IPC Validation Services qualified laboratory for IPC-4101, Microtek China is proud to be a part of this program.”
About Microtek Laboratories China
Microtek Laboratories China is a leading third-party testing agency, serving the electronics and polymeric materials manufacturing industry world-wide. It is operated in accordance with the ISO/IEC17025: 2005 management system, accredited by CNAS, CMA, and many large OEM’s. The lab provides testing and conformance verification to company, national & international standards for automotive, telecommunication, aerospace & aviation, electronic information products, polymeric products and other related industries and suppliers. It is a CQC licensed lab for "Non-metal materials" including printed circuit boards (PCB), copper-clad laminates (CCL) and plastics. The lab is also designated as the product service center for CPCA, an authorized training center for IPC-6012, IPC-A-610 & IPC-A-600, as well as a IPC Validation Services Qualified Test Laboratory for IPC-6012 and IPC-4101. In addition, Microtek Laboratories China has the capability of temperature and humidity calibration as recognized by CNAS.
Share on:
Suggested Items
The Evolution of Picosecond Laser Drilling
06/19/2025 | Marcy LaRont, PCB007 MagazineIs it hard to imagine a single laser pulse reduced not only from nanoseconds to picoseconds in its pulse duration, but even to femtoseconds? Well, buckle up because it seems we are there. In this interview, Dr. Stefan Rung, technical director of laser machines at Schmoll Maschinen GmbH, traces the technology trajectory of the laser drill from the CO2 laser to cutting-edge picosecond and hybrid laser drilling systems, highlighting the benefits and limitations of each method, and demonstrating how laser innovations are shaping the future of PCB fabrication.
Day 2: More Cutting-edge Insights at the EIPC Summer Conference
06/18/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) summer conference took place this year in Edinburgh, Scotland, June 3-4. This is the third of three articles on the conference. The other two cover Day 1’s sessions and the opening keynote speech. Below is a recap of the second day’s sessions.
Day 1: Cutting Edge Insights at the EIPC Summer Conference
06/17/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) Summer Conference took place this year in Edinburgh, Scotland, June 3-4. This is the second of three articles on the conference. The other two cover the keynote speeches and Day 2 of the technical conference. Below is a recap of the first day’s sessions.
Preventing Surface Prep Defects and Ensuring Reliability
06/10/2025 | Marcy LaRont, PCB007 MagazineIn printed circuit board (PCB) fabrication, surface preparation is a critical process that ensures strong adhesion, reliable plating, and long-term product performance. Without proper surface treatment, manufacturers may encounter defects such as delamination, poor solder mask adhesion, and plating failures. This article examines key surface preparation techniques, common defects resulting from improper processes, and real-world case studies that illustrate best practices.
RF PCB Design Tips and Tricks
05/08/2025 | Cherie Litson, EPTAC MIT CID/CID+There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.