-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueIn Pursuit of Perfection: Defect Reduction
For bare PCB board fabrication, defect reduction is a critical aspect of a company's bottom line profitability. In this issue, we examine how imaging, etching, and plating processes can provide information and insight into reducing defects and increasing yields.
Voices of the Industry
We take the pulse of the PCB industry by sharing insights from leading fabricators and suppliers in this month's issue. We've gathered their thoughts on the new U.S. administration, spending, the war in Ukraine, and their most pressing needs. It’s an eye-opening and enlightening look behind the curtain.
The Essential Guide to Surface Finishes
We go back to basics this month with a recount of a little history, and look forward to addressing the many challenges that high density, high frequency, adhesion, SI, and corrosion concerns for harsh environments bring to the fore. We compare and contrast surface finishes by type and application, take a hard look at the many iterations of gold plating, and address palladium as a surface finish.
- Articles
- Columns
Search Console
- Links
- Media kit
||| MENU - pcb007 Magazine
Heraeus Electronics and Mozaik Technology Ventures Sign Global Licensing Agreement for Photoimageable Thick Film Technologies
November 28, 2017 | HeraeusEstimated reading time: 2 minutes

Heraeus Electronics has announced a global licensing agreement with Mozaik Technology Ventures Limited, an industry leader in super fine thick film technology. Under the terms of the agreement, Heraeus Electronics will license a broad range of Mozaik’s photoimageable thick film paste technology.
Picture: Dr. Frank Stietz, President Heraeus Electronics und Steve Muckett, Gründer and Managing Director von Mozaik Technology Ventures sign global licensing agreement
The partnership with Mozaik will enable Heraeus to enhance its market-leading solution portfolio for customers who manufacture high-profile electronics, such as sensors, 5G high frequency communication circuits, smaller passive electronic components and touch panel displays. With the continued market trend toward smaller and finer electronics elements, advanced materials and the process technology to create them become increasingly critical requirements. The Mozaik photoimageable technology will be used to create a platform of thick film pastes such as silver, silver-platinum, silver-palladium, gold, platinum conductors and ceramic/glass insulators for these specific application areas.
According to Frank Stietz, president of Heraeus Electronics, “We have seen a market trend in thick film materials toward smaller features, such as conductors for finer lines and spaces. The industry will need to meet the demand and requirements for electronic component miniaturization and higher density microelectronic circuits. Mozaik’s product lines and technologies will enable us to set new standards in electronics capabilities and performance for our customers.”
Heraeus Electronics expects that by using photoimageable thick film pastes, its customers can build electronic components and circuits with lines and spaces (l/s) below 50 microns in size (demonstrated l/s already at 25 microns). The current state-of-the-art feature size with standard thick film inks is 75 microns under optimized and highly engineered conditions. In actual, practical manufacturing settings, most devices are built with 100 to 150 microns on an industrial scale.
Steve Muckett, the founder and Managing Director of Mozaik Technology Ventures, added, “We are pleased to partner with Heraeus Electronics because they are a strong and reliable supplier of electronic materials with a global reach. With Heraeus using our fine line capable pastes, it will drive benefits and innovation across our industry. We anticipate that many manufacturers of ceramic based circuits and components will be able to introduce low-cost and very fine resolution parts, which the market needs.”
About Heraeus
Heraeus, the technology group headquartered in Hanau, Germany, is a leading international family-owned company formed in 1851. With expertise, a focus on innovations, operational excellence and an entrepreneurial leadership, we strive to continuously improve the businesses of our customers around the world. We create high-quality solutions for our customers and strengthen their long-term competitiveness by combining material expertise with technological know-how. Our ideas are focused on important issues such as the environment, energy, health, mobility and industrial applications. Our portfolio ranges from components to coordinated material systems which are used in a wide variety of industries, including the steel, electronics, chemical, automotive and telecommunications industries.
In the 2016 financial year, Heraeus generated revenues without precious metals of €2.0 bn and a total revenue of €21.5 bn. With approximately 12,400 employees worldwide in more than 100 subsidiaries in 40 countries, Heraeus holds a leading position in its global markets.
In 2016, the Foundation for Family Businesses named Heraeus as one of the “Top 10 Family Businesses” in Germany.
Suggested Items
DuPont Unveils Brand Identity for Qnity, Future Electronics Spin-Off
05/15/2025 | PRNewswireDuPont unveiled the branding of Qnity, the planned independent Electronics public company that will be created through the intended spin-off of its Electronics business*.
K & F Electronics Invests in Workforce Training with IPC-A-610
05/15/2025 | K & F ElectronicsIn a strategic move to prioritize employee development and uphold quality standards, K & F Electronics, a third-generation, family-owned printed circuit board (PCB) manufacturer based in Fraser, Michigan, used a recent period of reduced production to certify its employees in IPC-A-610, the industry standard for the acceptability of electronic assemblies.
Canadian Circuits Inc. Unveils Rapid Prototype PCB Assembly Service to Accelerate Innovation
05/14/2025 | Canadian Circuits, Inc.Canadian Circuits Inc. (CCI), a leading provider of high-quality, made-in-Canada, Printed Circuit Board (PCB) solutions, is proud to announce the launch of its Prototype PCB Assembly (PCBA) service. This new offering enhances CCI’s commitment to empowering engineers and OEMs by accelerating the journey from concept to product launch with precision and efficiency in electronics manufacturing.
From DuPont to Qnity: A Bold Move in Electronics Materials
05/14/2025 | Marcy LaRont, I-Connect007DuPont has announced the intended spinoff of a public independent electronics company, Qnity, which will serve as a solutions provider to the semiconductor and electronics industries to enhance competitiveness and innovation in advanced computing, smart technologies, and connectivity. In this interview, Jon Kemp, Qnity CEO-elect and current president of DuPont’s Electronics business, shares his insights on the strategic separation from DuPont.
Legislative Update: Is the SEMI Investment Act Inclusive of PCB and Substrates?
05/13/2025 | I-Connect007 Editorial TeamIn response to this week's news about new U.S. legislation being put forth by SEMI to support our domestic electronics supply chain—the Strengthening Essential Manufacturing and Industrial (SEMI) Investment Act—IPC’s Richard Capetto, senior director of North American Government Relations, made the following statement.