The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Metcal Kicks Off 2018 with Strong Presence at MD&M West
January 8, 2018 | MetcalEstimated reading time: 1 minute
Metcal will showcase a range of its leading technologies in Booth 435 at the MD&M West 2018 exhibition, scheduled to take place February 6-8 at the Anaheim Convention Center in California. The company will show the CV-5210 Connection Validation (CV) Soldering System with new software and handpieces, the HCT2-200 Digital Hot Air Pencil, the new high thermal demand (HTD) hand-piece and the AC-STC Solder Tip Cleaner.
The CV Soldering System evaluates the quality of the solder joint by calculating the intermetallic compound formation and providing closed-loop feedback to the operator, mitigating risk in the process. Additionally, Metcal recently released the CV Monitoring Software to improve solder process traceability and create a performance baseline to quickly analyze soldering performance, identify solder condition changes, and allow changes to be made to the process.
The HCT2-200 Digital Hot Air Pencil was developed for very small surface mount component and package sizes (1206s and smaller) and low board densities.
The new High Thermal Demand (HTD) solution, comprised of a new handpiece and a selection of thermal efficient cartridges, is designed for use with Metcal's MX line of power supplies.
The AC-STC Solder Tip Cleaner features a replaceable brush system that pulls excess solder away from the tip into a removable collection tray for disposal while removing oxidation from the tip. The new Solder Tip Cleaner removes oxidation and extends the life of the solder tip. By placing the tip into the opening, the cleaner senses the tip and automatically activates, saving the operator time.
About Metcal
Metcal is a benchtop solutions expert that has delivered broad value to customers since its Silicon Valley beginnings in 1982. Offering unrivalled performance, risk mitigation, and ROI, we give electronics manufacturers in automotive, aerospace, medical devices and military sectors the tools—and the confidence—they need to develop faster, safer, more advanced products. Metcal provides advanced technology products across hand soldering, convection rework, fume extraction, and fluid dispensing applications. For more information, visit metcal.com.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.