Standard of Excellence: Delivering Excellence—A Daily Goal
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
The Knowledge Base: Building the Workforce of Tomorrow With EMAC
Tips & Tricks: Assembly Panelization
January 12, 2018 | Ken Horky, Peterson ManufacturingEstimated reading time: 2 minutes
Thoughtful PCB array and panel design can reduce line stoppage, improve changeover time and reduce material scrap. For the purpose of this discussion, a panel is an array of PCBs which may or may not include scrap material.
Fiducial location and design are good aids to prevent mistakes, but may still result in line stoppage. In this figure, the round features with square mask perimeter are fiducials. The square feature with round mask is a PCB bad mark.
Figure 1: A simple panel array of the top side and the mirrored horizontal view of bottom side components if applicable.
If you have fiducial recognition issues, making the shape of the mask opening different than the fiducial feature may help the vision system discern the target feature easier. Locating the bad mark at the PCB center consistently helps the line operator identify the bad mark without supporting drawings and reduces camera movement. Locating fiducials off center of the PCB will help prevent a print and/or place error but it will still stop the line upon the error.
Figure 2: The scored PCB array with the top row rotated 180°.
Figure 3: One row with top-side up and the second row mirrored vertically.
Figure 4: An array with a combination of mirroring and rotations. Within the four PCB orientations are the top side mirrored horizontally and vertically.
Page 1 of 2
Share on:
Suggested Items
BEST Inc. Introduces StikNPeel Rework Stencil for Fast, Simple and Reliable Solder Paste Printing
06/02/2025 | BEST Inc.BEST Inc., a leader in electronic component rework services, training, and products is pleased to introduce StikNPeel™ rework stencils. This innovative product is designed for printing solder paste for placement of gull wing devices such as quad flat packs (QFPs) or bottom terminated components.
KYZEN to Focus on Aqueous Cleaning and Stencil Cleaning at SMTA Juarez
05/20/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Juarez Expo and Tech Forum, scheduled to take place Thursday, June 5 at the Injectronics Convention Center in Ciudad Jarez, Chihuahua.
KYZEN to Spotlight Stencil Cleaning Solutions at SMTA Oregon
05/02/2025 | KYZEN'KYZEN, the global leader in innovative environmentally friendly cleaning chemistries, will exhibit at the SMTA Oregon Expo & Tech Forum, scheduled to take place on Tuesday, May 20 at the Wingspan Event and Conference Center in Hillsboro, OR. KYZEN’s cleaning expert Jeff Deering will be on-site at the expo providing information about stencil cleaning chemistries, including KYZEN E5631J.
KYZEN to Feature Stencil Cleaning and Aqueous Cleaners at SMTA Capital Expo and Tech Form
04/28/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Capital Expo and Tech Forum, scheduled to take place Thursday, May 8 at George Mason University – Mason Square in Arlington, VA.
KYZEN Focuses on Aqueous Cleaning and Stencil Cleaning at SMTA Wisconsin
04/24/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Wisconsin Expo and Tech Forum, scheduled to take place Tuesday, May 6 at the Crowne Plaza Milwaukee Airport. KYZEN will be on-site to provide attendees with information about aqueous cleaning chemistry AQUANOX A4618 and stencil cleaner KYZEN E5631J.