The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Indium Earns ISO/TS 16949 Automotive Certification
January 16, 2018 | Indium CorporationEstimated reading time: 1 minute
Indium Corporation has been awarded ISO/TS 16949 management system certificates for two of its manufacturing facilities and company headquarters.
“SRI Quality System Registrar (SRI) is pleased to acknowledge that Indium Corporation has demonstrated effective implementation of a management system that satisfies the tough auto standard: ISO/TS 16949,” said Edward L. Maschmeier, Director, Certification. “This certification shows their automotive customers worldwide that Indium Corporation is committed to being recognized as a long-term supplier of quality goods and services.”
Indium Corporation’s Business Park Drive facility in Utica, N.Y., earned an ISO/TS 16949 management certificate for the design and manufacturing of brazing and solder materials as ribbon, wire, preforms, and engineered solders; flux-coated materials; NanoFoil; sputtering target bonding; pure indium metal and fabricated indium metals for electronics assembly.
Indium Corporation’s headquarters and manufacturing operations in Clinton, N.Y., earned certification for the design and manufacture of solder powders, solder pastes, soldering fluxes, epoxy, and related materials for semiconductor manufacturing and electronics assembly.
“Quality, precision, and reliability are core tenets at the heart of every activity at Indium Corporation,” said Ross Berntson, Indium Corporation President and COO. “These certifications are formal evidence of the commitment to quality as a core operating principle since Indium Corporation was founded more than 80 years ago.”
The ISO/TS 16949:2009 is an international technical specification standard aimed at the development of a quality management system that provides for continuous improvement, emphasizing defect prevention, and the reduction of variation and waste in the automotive industry supply chain.
About Indium Corporation
Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.
For more information about Indium Corporation, click here.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.