Demand for Uranium Projected to Grow
January 22, 2018 | PRNewswireEstimated reading time: 4 minutes
According to a research report released by Grand View Research, global nuclear energy demand is to grow. Raw uranium is mined, milled, refined and converted, fueling nuclear reactors to generate electricity. Rapid population growth, along with improved lifestyle has resulted in a strong energy demand from households, in both advanced nations and emerging markets. The research report indicates that rising clean power demands, as well as depleting fossil fuel reserves are expected to raise energy concerns. These concerns are encouraging energy companies and governments to invest in alternative energy sources, including nuclear energy. The World Nuclear Association points out that the USA is the world's largest producer of nuclear power, accounting for more than 30% of worldwide nuclear generation of electricity. Clean Commodities Corp, Uranium Energy Corp., Ur-Energy Inc., Fission Uranium Corp., NexGen Energy Ltd.
According to a report by Mining Weekly, GlobalData mining research director Alok Shukla estimates that global uranium mine production increased by 4.8% in 2017 to 67 686.1 ton, along with new uranium projects coming on stream in Russia, Namibia and the US. South Africa's uranium production is also projected to increase by 4.2% in 2017 to 377.7 ton and growing extensively at a compound annual growth rate of 45.1% to reach 1 672.1 t by 2020. The report indicates that the global uranium mine production is increasing to meet rising demand that is likely to follow as reactors come on stream.
Clean Commodities Corp is currently listed on the TSX Venture Exchange under the ticker 'CLE'. Earlier today the company announced that, "the Corporation's option partner AREVA Resources Canada Inc. ("AREVA Resources") will be commencing a planned 4,500 metre diamond drill program at the Preston Uranium Project. The project is located in the western Athabasca Basin near NexGen Energy Ltd.'s high-grade Arrow deposit hosted on its Rook-1 property and Fission Uranium Corp.'s Triple R deposit located within their PLS Project area.
Clean Commodities and Skyharbour Resources Ltd. entered into an Option Agreement with AREVA Resources whereby AREVA Resources has an option to acquire up to a 70% working interest in the Preston Uranium Project. Under the Agreement, AREVA Resources will contribute cash and exploration program considerations totaling up to CAD $8,000,000 in exchange for up to 70% of the project area.
Highlights of AREVA Resources' Exploration Programs at Preston Uranium Project: - AREVA Resources planning to carry out CDN $2,000,000 in exploration and diamond drilling programs over the next year. - Recently completed geophysical programs included Moving Loop Transient Electromagnetic (ML-TEM) surveys on two grids located on the western part of the project, east of Highway 955. - A diamond drilling program consisting of 15 to 20 drill holes for a total of approximately 4,500 metres to commence shortly. - AREVA Resources may earn up to a 70% interest in the 49,635-hectare Preston project through $8,000,000 of total project consideration over six (6) years, including up to $7,300,000 of exploration work programs and $700,000 of cash payments. - If carried to completion, a tripartite joint venture would be formed being 70% as to AREVA Resources and 30% as equally divided between Clean Commodities and Skyharbour.
Preston Uranium Project Winter 2018 Diamond Drilling Program: AREVA Resources will be commencing a diamond drilling program shortly consisting of 15 to 20 drill holes at the Preston Uranium Project for a total of approximately 4,500 metres which is scheduled to take approximately two and half months to complete. Drilling will focus on areas of interest defined by ground EM surveys within the western part of the project, east of Highway 955 and the 'FS area' of the project. The estimated cost of the 2018 exploration program is CDN$2,000,000. The Corporation will provide updates on the progress of this drill program as they become available.
Recent Preston Uranium Project Geophysical Programs: In the spring of 2017, a Quaternary evaluation of the Preston Uranium Project was performed by AREVA Resources followed by a two week summer field program which included the review of historical drill holes, outcrop visits, sampling and general prospecting and surveying. AREVA then completed ground EM surveys within the Dixon Lake target area and a more exhaustive review of the project historical information. In the fall of 2017, Moving Loop Transient Electromagnetic (ML-TEM) surveys were completed on two grids located east of Highway 955. The Johnson Lake Corridor (JLC) hosts two main north-northeast and northeast trending VTEM conductive trends. Numerous areas of interest have been identified along the VTEM conductive zones and of particular interest at this time is the area northeast of Canoe Lake which hosts radon-in-water anomalies.
Overview of Preston Lake Uranium Project: The significant potential of the Western Athabasca Basin has been highlighted by recent discoveries in the area by NexGen Energy Ltd. (Arrow), Fission Uranium Corp. (Triple R) and a joint-venture consisting of Cameco Corporation, AREVA Resources Canada Inc. and Purepoint Uranium Group Inc. (Spitfire). More than $4.7-million in expenditures on the entire Preston Uranium Project have been incurred to-date. This exploration has consisted of ground gravity, airborne and ground electromagnetics, radon, soil, silt, biogeochemistry, lake sediment, and geological mapping surveys, as well as two exploratory drill programs. Several high-priority drill target areas associated with multiple prospective exploration corridors have been successfully delineated through this methodical, multi-phased exploration initiative, which has culminated in an extensive, proprietary geological database for the project area."
Suggested Items
Pluritec: Growth Depends on Developing Next-gen Products
05/15/2025 | Marcy LaRont, PCB007 MagazineMaurizio Bonati, VP of sales at Pluritec, says a new generation of products has driven strong business performance and a significant backlog. However, there’s a concern about the potential negative impact of tariffs. Pluritec is taking proactive measures to minimize these effects by focusing on enhancing equipment capabilities, automating processes, and expanding customer support.
Driving Innovation: Registration in PCB Production Throughout the Process
05/06/2025 | Simon Khesin -- Column: Driving InnovationPCB manufacturing is a fascinating industry where multiple disciplines—chemical, mechanical, and optical processes—intersect. Each field plays a crucial role, and missing even one step can significantly impact production and yield. In the realm of mechanical and optical processes, one of the most critical aspects influencing the final result—especially in complex PCB designs—is registration.
Real Time with... IPC APEX EXPO 2025: Revolutionizing PCB Manufacturing with Laser Technology from MKS' ESI
04/16/2025 | Real Time with...IPC APEX EXPOIn this interview, Barry Matties speaks with Casey Krueger from MKS' ESI. MKS' ESI focuses on laser-based micro machining for PCBs, especially in HDI and IC substrates. The Geode CO2 drilling system, launched in 2019, uses AOD technology to transform the market. Trends show a shift toward smaller vias for advanced packaging, with laser drilling concentrated in Asia. North America sees rising investments in laser tech, prioritizing quality, productivity, and energy efficiency, while AI integration boosts ESI's operations.
Real Time with... IPC APEX EXPO 2025: Pluritec's Expansion and Innovations in North America
04/08/2025 | Real Time with...IPC APEX EXPOMaurizio Bonati from Pluritec discusses the company's growth in North America. He highlights investments in infrastructure and customer support, along with product advancements like X-ray drilling machines and increased automation to boost production efficiency.
Real Time with... IPC APEX EXPO 2025: Schmoll America—Committed to Supporting Customers
03/31/2025 | Real Time with...IPC APEX EXPOKurt Palmer of Schmoll America and Stephan Kunz of Schmoll Maschinen GmbH had a great show, reporting solid attendance and good opportunities, as Schmoll America celebrates its first anniversary. With a booth full of equipment for attendees to see and touch, they showcased unique products like the Pico laser and X-ray machine, and discussed plans for a new facility.