The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Alpha to Present on Flexible Printed and Hybrid Electronics at 2018FLEX
February 7, 2018 | Alpha Assembly SolutionsEstimated reading time: 2 minutes
Alpha Assembly Solutions is presenting at the upcoming 2018FLEX Conference taking place from February 12-15 in Monterey, California.
Rahul Raut, Director of Strategy & Technology Acquisition for Alpha, will present a technical paper on the Development of a Fully Integrated, Compatible, Materials Stack for Flexible Printed Electronics. Mr. Raut will present a holistic view of the materials aspect for the Printed Electronics Ecosystem, and specifically highlight FPE building blocks being developed from an integrated perspective.
Bawa Singh, Alpha’s Executive Vice President of Technology, will present on Novel Low Temperature Materials as Key Enablers of Flexible Hybrid Electronics. Dr. Singh will explore the challenges and limitations of current generation Flexible Hybrid Electronics and present the use of novel low temperature solders and high reliability alloys to address the incumbent’s shortcomings for assembly of a wide array of flexible substrates and low temperature components.
Both Mr. Raut & Dr. Singh have been leading the product innovation and development at Alpha Assembly Solutions, a part of the MacDermid Performance Solutions group of businesses, to bring leading edge, next generation materials & processing technologies that enable flexible and high reliability products in emerging sectors of the electronics industry.
About SEMI
SEMI connects over 2,000 member companies and 1.3 million professionals worldwide to advance the technology and business of electronics manufacturing. SEMI members are responsible for the innovations in materials, design, equipment, software, devices, and services that enable smarter, faster, more powerful, and more affordable electronic products. FlexTech, the Fab Owners Alliance (FOA) and MEMS & Sensors Industry Group (MSIG) are SEMI Strategic Association Partners, defined communities within SEMI focused on specific technologies.
About Alpha Assembly Solutions
Alpha Assembly Solutions, a MacDermid Performance Solutions Business, is the global leader in the development, manufacturing and sales of innovative specialty materials used in a wide range of industry segments, including electronics assembly, power electronics, die attach, LED lighting, photovoltaics, semiconductor packaging, automotive, flexible & printed electroncis and others.
With a unique global presence in over 30 locations throughout the Asia Pacific, Americas and Europe regions, Alpha supplies a full line of ALPHA electronics assembly material products, including Solder Paste, Exactalloy® Solder Preforms, Cored Solder Wire Solder, Wave Soldering Fluxes, Bar Solder Alloys, and Stencils. It offers die attach product technologies to the power electronics segment in its Argomax, Atrox and Fortibond brands.
For the LED segment, Alpha offers its Lumet products covering applications from die attach to systems assembly in the LED manufacturing process. Alpha also offers product technologies for the Photovoltaic segment, including high performance liquid fluxes and solder alloys for producing standard ribbon and bus bar, as well as, solder pastes, cored wire, conductive adhesives and preforms for use in PV module assembly. Also, Alpha’s Advanced Materials unit is the leader in electronic polymers and solder materials for semiconductor packaging applications.
Since its founding in 1872, Alpha has been committed to developing and manufacturing the highest quality specialty materials. For more information, click here.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.