The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
DfR Solutions Releases Temperature-Based FEA with Sherlock 5.4
March 27, 2018 | DfR SolutionsEstimated reading time: 3 minutes
DfR Solutions today announced the next release of Sherlock Automated Design Analysis software - Version 5.4. Advanced features include Temperature-based FEA, Materials Library Expansion, Component Failure Modes, and a new Sqlite Parts Library option. These expanded capabilities continue to empower Sherlock users to not only analyze their designs, but to make faster, more accurate reliability predictions.
Sherlock Version 5.4 Features:
Temperature-Based FEA
In extreme environments like aerospace and automotive, electronics reliability is critical to the performance of the product and the safety of its users. The new Temperature-based FEA capability enables users to simulate boards experiencing simultaneous temperature-dependent mechanical and vibrational stresses, modeling to real-world conditions where products are exposed to many stressors at the same time. This new analysis is performed directly inside of the Sherlock software, without the need for other FEA tools, for faster, more accurate fatigue predictions.
Component Failure Modes
Component level failure, unrelated to solder fatigue, can occur without thermo-mechanical stresses and significantly influence the overall board reliability. This advanced new Sherlock feature allows users to predict the failure of components due to wearout (long-term degradation). This is significant to IoT, automotive, wearable and other technologies where PCBs operate in a relatively benign environment, and wearout becomes the dominating influence on the lifetime of the components. No other board-level modeling tool provides component-level failure predictions.
Materials Library Update
The electronics industry is ever-changing, and the variety and complexity of materials used in electronics design is vast. Only Sherlock includes an extensive materials database that is constantly growing. In Sherlock version 5.4, over 100 new materials have been added including a variety of today’s materials utilized in all sectors of the electronics industry: conformal coatings, potting materials, epoxy molding compounds, and underfills. Temperature-dependent material effects are automatically incorporated, saving time in data entry and allowing designers and engineers to make reliability predictions faster and more efficiently.
SQlite Shared Parts Library
With this new shared parts library option, Sherlock users will experience improved query performance. The Sqlite Part Library can be accessed directly from third-party tools providing maximum flexibility for users of all abilities.
‘Sherlock 5.4 is just one more example of our drive to improve our customer’s ability to accurately predict the reliability of their products,’ said Dr. Craig Hillman, CEO of DfR Solutions. ‘No other simulation tool on the market has that critical capability,’ noted Hillman. ‘Sherlock 5.4 recently received an Innovation Award from IPC APEX for pushing the boundaries of technology and changing the technological landscape of the electronics industry.’ said Hillman. ‘But we won’t stop there, keep an eye on the horizon for even more ground-breaking new advancements in Sherlock in 2018.’
About Sherlock Automated Design Analysis Software
Sherlock is the first-of-its-kind Automated Design Analysis software for analyzing, grading, and certifying the expected reliability of products at the circuit card assembly level. Based on the science of Physics of Failure, it is used by the electronics industry across all markets. Sherlock continues to evolve, incorporating new innovations and enhancements allowing users to manage increasingly complex analyses faster and more efficiently than ever before.
About DfR Solutions
DfR Solutions has world-renowned expertise in applying the science of Reliability Physics to electrical and electronics technologies and is a leading provider of quality, reliability, and durability (QRD) research and consulting for the electronics industry. The company’s integrated use of Physics of Failure (PoF) and Best Practices provides crucial insights and solutions early in product design and development and throughout the product life cycle. DfR Solutions specializes in providing knowledge- and science-based solutions to maximize and accelerate the product integrity assurance activities of their clients in every marketplace for electronic technologies (consumer, industrial, automotive, medical, military, telecom, oil drilling, and throughout the electronic component and material supply chain). For more information regarding DfR Solutions, click here.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.