Dan’s Biz Bookshelf: ‘Dream First, Details Later
Happy’s Tech Talk #40: Factors in PTH Reliability—Hole Voids
Facing the Future: Time for Real Talk, Early and Often, Between Design and Fabrication
Show & Tell: IPC APEX EXPO 2018 is on the Books!
May 14, 2018 | Happy HoldenEstimated reading time: 1 minute
I am home from another IPC APEX EXPO. I have been going to these things for more than 38 years, and I learn something each year.
I spent most of Monday attending the Design Forum, which is a set of classes specifically targeted at PCB designers. Up first was Dana Korf, an old hand at tooling and front-end engineering. He presented “Printed Circuit Board Factory 4.0,” a comprehensive program he and others are undertaking to develop a completely digital fabrication data package in a single .XML file, as outlined in Figure 1. The unfortunate truth is that less than 10% of all new orders arrive at the PCB fabricator’s facility with complete, accurate design data; most have missing or incorrect data. Another big issue is that a lot of the preliminary or front-end information is in the form of drawings and specifications that require reading and interpreting, and sometimes even further investigation, as it is often conflicting data. Dana wants all this data to be digital to drive a modern Industry 4.0 factory.
Dana went over the progress since the 1970s culminating in the current IPC-2581 standard, and additional software added to cover what the OEM is sending and what the factory needs.
The digital modernization covered information for the BOM (ECAD and MCAD), mechanical fabrication, stackup, material requirements, impedance requirements, plating and surface finish, artwork, drawings, notes and requirements for acceptability. This information can support the requirements of the enterprise business system PLM/ERP.
To read the full version of this article which originally appeared in the Show & Tell Magazine, click here.
Share on:
Suggested Items
Seeing a Future in Mexico
07/09/2025 | Michelle Te, I-Connect007The Global Electronics Association (formerly known as IPC) has been instrumental in fostering a partnership with Guanajuato, a state north of Mexico City with 12 industrial clusters and close to 150 companies involved in electronics. This past spring, Alejandro Hernández, the undersecretary for investment promotion in Guanajuato, attended IPC APEX EXPO 2025 at the invitation of IPC Mexico Director Lorena Villanueva, where he met with several companies to discuss the opportunities available in Mexico. He is inviting electronics-related companies seeking long-term investment in a centrally located area with access to highways, railways, and ports.
The Global Electronics Association Releases IPC-8911: First-Ever Conductive Yarn Standard for E-Textile Application
07/02/2025 | Global Electronics AssociationThe Global Electronics Association announces the release of IPC-8911, Requirements for Conductive Yarns for E-Textiles Applications. This first-of-its-kind global standard establishes a clear framework for classifying, designating, and qualifying conductive yarns—helping to address longstanding challenges in supply chain communication, product testing, and material selection within the growing e-textiles industry.
IPC-CFX, 2.0: How to Use the QPL Effectively
07/02/2025 | Chris Jorgensen, Global Electronics AssociationIn part one of this series, we discussed the new features in CFX Version 2.0 and their implications for improved inter-machine communication. But what about bringing this new functionality to the shop floor? The IPC-CFX-2591 QPL is a powerful technical resource for manufacturers seeking CFX-enabled equipment. The Qualified Product List (QPL) helps streamline equipment selection by listing models verified for CFX compliance through a robust third-party virtual qualification process.
The Knowledge Base: A Conference for Cleaning and Coating of Mission-critical Electronics
07/08/2025 | Mike Konrad -- Column: The Knowledge BaseIn electronics manufacturing, there’s a dangerous misconception that cleaning and coating are standalone options, that they operate in different lanes, and that one can compensate for the other. Let’s clear that up now. Cleaning and conformal coating are not separate decisions. They are two chapters in the same story—the story of reliability.
Advancing Aerospace Excellence: Emerald’s Medford Team Earns Space Addendum Certification
06/30/2025 | Emerald TechnologiesWe’re thrilled to announce a major achievement from our Medford, Oregon facility. Andy Abrigo has officially earned her credentials as a Certified IPC Trainer (CIT) under the IPC J-STD-001 Space Addendum, the leading industry standard for space and military-grade electronics manufacturing.