Standard of Excellence: Delivering Excellence—A Daily Goal
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
The Knowledge Base: Building the Workforce of Tomorrow With EMAC
Show & Tell: IPC APEX EXPO 2018 is on the Books!
May 14, 2018 | Happy HoldenEstimated reading time: 1 minute
I am home from another IPC APEX EXPO. I have been going to these things for more than 38 years, and I learn something each year.
I spent most of Monday attending the Design Forum, which is a set of classes specifically targeted at PCB designers. Up first was Dana Korf, an old hand at tooling and front-end engineering. He presented “Printed Circuit Board Factory 4.0,” a comprehensive program he and others are undertaking to develop a completely digital fabrication data package in a single .XML file, as outlined in Figure 1. The unfortunate truth is that less than 10% of all new orders arrive at the PCB fabricator’s facility with complete, accurate design data; most have missing or incorrect data. Another big issue is that a lot of the preliminary or front-end information is in the form of drawings and specifications that require reading and interpreting, and sometimes even further investigation, as it is often conflicting data. Dana wants all this data to be digital to drive a modern Industry 4.0 factory.
Dana went over the progress since the 1970s culminating in the current IPC-2581 standard, and additional software added to cover what the OEM is sending and what the factory needs.
The digital modernization covered information for the BOM (ECAD and MCAD), mechanical fabrication, stackup, material requirements, impedance requirements, plating and surface finish, artwork, drawings, notes and requirements for acceptability. This information can support the requirements of the enterprise business system PLM/ERP.
To read the full version of this article which originally appeared in the Show & Tell Magazine, click here.
Share on:
Suggested Items
Advancing Aerospace Excellence: Emerald’s Medford Team Earns Space Addendum Certification
06/30/2025 | Emerald TechnologiesWe’re thrilled to announce a major achievement from our Medford, Oregon facility. Andy Abrigo has officially earned her credentials as a Certified IPC Trainer (CIT) under the IPC J-STD-001 Space Addendum, the leading industry standard for space and military-grade electronics manufacturing.
Magnalytix and Foresite to Host Technical Webinar on SIR Testing and Functional Reliability
06/26/2025 | MAGNALYTIXMagnalytix, in collaboration with Foresite Inc., is pleased to announce an upcoming one-hour Webinar Workshop titled “Comparing SIR IPC B-52 to Umpire 41 Functional & SIR Test Method.” This session will be held on July 24, 2025, and is open to professionals in electronics manufacturing, reliability engineering, and process development seeking insights into new testing standards for climatic reliability.
IPC Rebrands as Global Electronics Association: Interview With Dr. John W. Mitchell
06/22/2025 | Marcy LaRont, I-Connect007Today, following a major announcement, IPC is embracing the rapid advancement of technology with a bold decision to change its name to the Global Electronics Association. This name more accurately reflects the full breadth of its work and the modern realities of electronics manufacturing. In this exclusive interview, Global Electronics Association President and CEO Dr. John W. Mitchell shares the story behind the rebrand: Why now, what it means for the industry, and how it aligns with the organization’s mission.
Global Electronics Association Debuts; New Name Elevates IPC’s 70-Year Legacy as Voice of $6 Trillion Electronics Industry
06/25/2025 | Global Electronics AssociationToday begins a new chapter for IPC as it officially becomes the Global Electronics Association, reflecting its role as the voice of the electronics industry. Guided by the vision of “Better electronics for a better world,” the Global Electronics Association (electronics.org) is dedicated to enhancing supply chain resilience and promoting accelerated growth through engagement with more than 3,000 member companies, thousands of partners, and dozens of governments across the globe.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/20/2025 | Andy Shaughnessy, I-Connect007It’s been a busy week in this industry, and we have news and articles from the PCB design, fabrication and assembly communities. Some of this news is out of this world. We may be losing the high ground—the really high ground. Columnist Jesse Vaughan explains how the U.S. seems to be falling behind in space, and how this could affect our ability to defend ourselves in the future. We have an update on the U.S.-China tariff talks, which seem to be moving forward, though sometimes at a snail’s pace.