3D Printing and Additive Manufacturing in PCBA
May 28, 2018 | Zohair Mehkri, David Geiger, Anwar Mohammed, and Murad Kurwa, FlexEstimated reading time: 6 minutes
Contrary to popular belief, 3D printing and additive manufacturing are not the same thing; however, they can be used interchangeably for the sake of ease. According to ASTM F2792-12a “Standard Terminologies for Additive Manufacturing Technologies,” 3D printing is “the fabrication of objects through the deposition of a material using a print head, nozzle, or other printer technology.”
The process starts with a 3D model drawing that is done on any standard CAD software. This 3D model file is then converted into a stereolithography file format by either the native program or a third-party file converter. Some printers have this file conversion capability as part of their software suite for their printers. The file is then converted into GCode or a language that the printer can understand, essentially creating the file into cross sectional slices of the part. This step is commonly known as “slicing.”
Once the slicing of the drawing has been done the printer is ready to start the print. For nearly all 3D printers, the above process is the same, with the printing process itself being the main differentiator. In a fused filament fabrication printer, once the 3D drawing is sliced, the printer can begin printing. The main components of the printer are, the print bed, the extruder, the hot-end, and the material. Material for this technology usually comes in a wire form on a spool. This wire filament is fed into the extruder, the extruder uses torque and pinch to control the speed of the filament being fed into the hot-end. Once the filament is in the hot-end, it is melted using heat.
The melted material is forced out of the hot-end by the extruder that is pushing in more material from the top. The hot-end, usually made of aluminum, deposits the melted material onto the build plate in a designated pattern as dictated by the software. As the material is being deposited by the hot-end, the build plate is moving in a X-, Y- or Z-axis depending on the part requirements of what is being printed. In some printers the build plate will stay stationary and the hot-end will move in a Cartesian plane to create the print. This process describes fused filament fabrication (FFF), which is one of the technologies that the company currently employs.
Fused filament fabrication currently is used mainly for plastic materials. If metal printing is required, direct metal laser sintering is utilized to print metal parts. The process of creating a 3D model to be understood by Direct Metal Laser Sintering printers is as described above; however, the process of printing is vastly different. Metal printers are usually larger in footprint due to the high-quality components and the auxiliary processes required to ensure effective operation of the machine as well as quality of the print. The main components of a metal are the build plate, re-coater, laser and powder.
Before a metal part is printed, the build chamber will fill up with an inert gas, usually argon. This is to ensure that no oxidation occurs during the process. The build plate where the powder is residing, and the re-coater blade will be leveled. This can be done manually, but most printers can be automatically calibrated to level before a print starts. After the components are leveled, the print can start. A laser will sinter the powder in the cross-sectional geometry of the part. Once the sintering for that level has finished, a re-coater blade that was located off to the side of the build area will move over the sintered layer and coat a new layer of powder on top.
The layer of powder that is re-coated onto the sintered layer is very important to the integrity and quality of the print. If too much powder is re-coated, the layer below and the layer above may not be sintered together well by the laser. If there is too little powder, the laser might sinter already sintered powder, causing varying layer heights in the print. The even distribution of powder and the correct amount of powder is a key area that currently affects how the powder is re-coated on top of itself. Layer by layer powder will be re-coated and sintered by the laser until the part is complete.
Page 1 of 2
Suggested Items
Real Time With... IPC APEX EXPO 2025: Best Student Technical Paper Winner—Attila Rektor
04/10/2025 | Marcy LaRont, I-Connect007Attila Rektor, a Ph.D student from Boise State, won the best technical paper award at IPC APEX EXPO 2025. His paper explores enhancing the conductivity of laser-induced graphene for flexible circuits. The research, funded by SAIC, involved modulating surface energy to enable effective copper plating. This breakthrough has potential applications in flexible printed circuit boards, sensing, and biomedical devices.
Real Time with... IPC APEX EXPO 2025: Advancements for Flexible Circuit Technologies
04/10/2025 | Real Time with...IPC APEX EXPOMark Finstad and Chris Clark from Flexible Circuit Technologies discuss their new marketing campaign for catheter circuits, featuring larger formats and advanced specifications. They explain the development of in-house materials for high-density circuits, enhancing cost competitiveness. They highlight the opening of a new facility in China for advanced assembly services, along with focused training sessions to fill industry education gaps and promote early customer engagement for better project outcomes.
Adaptsys, APP Systems Services Announce Strategic Partnership in Singapore
04/08/2025 | AdaptsysAdaptsys has formed a strategic partnership with APP System Services, bringing our innovative Re-flex II inline carrier tape forming technology to customers in Singapore.
CEE PCB Appoints Markus Voeltz to Business Development Director Europe
04/02/2025 | CEE PCBCEE PCB, a leading manufacturer of printed circuit boards (PCBs) and flexible printed circuits (FPCs) with 3 production facilities in China, is expanding its presence in Europe and began providing local support in March 2025. With 25 years of experience in the industry, the company is enhancing its commitment to European customers by providing more direct collaboration for technical inquiries and advice.
Real Time with... IPC APEX EXPO 2025: Discover Comprehensive PCB Solutions with American Standard Circuits
04/01/2025 | Real Time with...IPC APEX EXPOAnaya Vardya, CEO of American Standard Circuits, highlights the company's dedication to offering complete PCB solutions. The company provides free design packages and caters to various sectors, including military and telecommunications.