It’s Only Common Sense: Selling to Today's Generation of Buyers
Dan’s Biz Bookshelf: ‘Believe in Better'
The Big Picture: Our Big ‘Why’ in the Age of AI
Matrix Materials Support Ultra-Long Flexible Circuits Applications
May 31, 2018 | MatrixEstimated reading time: 1 minute
The market for long flexible printed circuits continues to grow rapidly. The performance and high reliability of flexible circuits over traditional hard wiring and cabling continues to expand into new applications in medical equipment, automotive, aerospace and defense applications. One key challenge for manufacturing ultra-long circuits has been obtaining the custom sized long panels or flexible circuit roll materials needed to fabricate these circuits.
Matrix is pleased to announce that it can support long flexible circuit applications with either copper clad flex materials in roll form or custom made long flex material panel sizes made with the leading Panasonic Felios and Matrix Plus brand of flexible circuit materials. Matrix maintains a wide range of roll materials in stock and can provide custom panels on a quick-turn basis from the flex materials conversion center located in our Santa Clara, California location.
“We are pleased to take a leadership role in supporting this exciting market with a growing list of customers that are using proprietary roll to roll and long circuit manufacturing processes.” stated Bob Berg, Matrix VP of Sales and Marketing.
About Matrix USA Inc.
Committed to the motto, “Quality Products, Dependable People”, Matrix was established in 1977 with the objective of providing quality raw materials to the North American Printed Circuit Board Industry. Matrix has four rapid-response warehouses located throughout the US and Canada that fulfill high quality, fast delivery, and custom orders daily. For further information, click here.
Share on:
Suggested Items
The Evolution of Picosecond Laser Drilling
06/19/2025 | Marcy LaRont, PCB007 MagazineIs it hard to imagine a single laser pulse reduced not only from nanoseconds to picoseconds in its pulse duration, but even to femtoseconds? Well, buckle up because it seems we are there. In this interview, Dr. Stefan Rung, technical director of laser machines at Schmoll Maschinen GmbH, traces the technology trajectory of the laser drill from the CO2 laser to cutting-edge picosecond and hybrid laser drilling systems, highlighting the benefits and limitations of each method, and demonstrating how laser innovations are shaping the future of PCB fabrication.
Day 2: More Cutting-edge Insights at the EIPC Summer Conference
06/18/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) summer conference took place this year in Edinburgh, Scotland, June 3-4. This is the third of three articles on the conference. The other two cover Day 1’s sessions and the opening keynote speech. Below is a recap of the second day’s sessions.
Day 1: Cutting Edge Insights at the EIPC Summer Conference
06/17/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) Summer Conference took place this year in Edinburgh, Scotland, June 3-4. This is the second of three articles on the conference. The other two cover the keynote speeches and Day 2 of the technical conference. Below is a recap of the first day’s sessions.
Preventing Surface Prep Defects and Ensuring Reliability
06/10/2025 | Marcy LaRont, PCB007 MagazineIn printed circuit board (PCB) fabrication, surface preparation is a critical process that ensures strong adhesion, reliable plating, and long-term product performance. Without proper surface treatment, manufacturers may encounter defects such as delamination, poor solder mask adhesion, and plating failures. This article examines key surface preparation techniques, common defects resulting from improper processes, and real-world case studies that illustrate best practices.
RF PCB Design Tips and Tricks
05/08/2025 | Cherie Litson, EPTAC MIT CID/CID+There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.