The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Indium Engineers Earn Lean Six Sigma Green Belt Certification
June 12, 2018 | Indium CorporationEstimated reading time: 1 minute
Indium Corporation has announced that three company engineers have earned their designation as Lean Six Sigma Green Belt-certified. With their recent designation, Daniel Siedsma, Chemical Process Engineer; Adam Murling, Technical Support Engineer; and Michael Wood, Manufacturing Process Engineer, join a number of employees who are Lean Six Sigma certified at Indium.
Lean Six Sigma is a business approach that focuses on improving workplace performance by reducing waste and process variations. The certification process involves two weeks of training that culminates in an examination in statistics, designed experiments, statistical process control, and "lean" continuous improvement concepts.
Siedsma joined Indium in 2011 as a chemical process engineer and performs research and development with Indium's metals and compounds products. He earned his bachelor's degree in chemical engineering from Rensselaer Polytechnic Institute (RPI) with a minor in general psychology.
Murling joined Indium in 2014 as a technical support engineer. He is responsible for providing leading-edge technical support for Indium's global account initiatives through SMT process optimization, material recommendations, and customer training. He is an active blogger and has authored numerous technical papers. He earned his bachelor's degree in chemical engineering from Clarkson University.
Wood joined Indium in 2017 as a manufacturing process engineer working with Indium's engineered solder products. He earned his bachelor's degree in mechanical engineering technology from the State University of New York Polytechnic Insitute.
About Indium Corporation
Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.
For more information about Indium Corporation, click here.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.