Standard of Excellence: Delivering Excellence—A Daily Goal
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
The Knowledge Base: Building the Workforce of Tomorrow With EMAC
Microtek Laboratories China Adds High-Tech Reflow Oven for Automotive and Transportation Reflow Simulation Testing
June 26, 2018 | Microtek Laboratories ChinaEstimated reading time: 1 minute
Microtek is proud to announce the addition of a 13-zone, active-cooled, Heller reflow oven at its Changzhou, China facility to accomplish reflow preconditioning for test samples. Automotive and Transportation Reliability testing requires aggressive reflow preconditioning cycles prior to reliability testing that demand a 13 zone oven with active water cooling to accomplish properly.
The new reflow oven is also equipped to use an inert nitrogen environment for reflow that protects the soldermask and surface finish from degradation due to oxidation during reflow exposure. Microtek’s commitment to Automotive and Transportation testing also includes the use of 10 thermal shock chambers equipped for "Single Hole" or "Daisy Chain" reliability testing along with 28 humidity and HAST chambers equipped with 256 channels of CAF/ECM/SIR testing capability up to 2000VDC.
About Microtek Laboratories China
Microtek Laboratories China is a leading third-party testing agency, serving the electronics and polymeric materials manufacturing industry world-wide. It is operated in accordance with the ISO/IEC17025: 2005 management system, accredited by CNAS, CMA, and many large OEM’s. The lab provides testing and conformance verification to company, national & international standards for automotive, telecommunication, aerospace & aviation, electronic information products, polymeric products and other related industries and suppliers. It is a CQC licensed lab for "Non-metal materials" including printed circuit boards (PCB), copper-clad laminates (CCL) and plastics. The lab is also designated as the product service center for CPCA, an authorized training center for IPC-6012, IPC-A-610 & IPC-A-600, as well as a IPC Validation Services Qualified Test Laboratory for IPC-6012 and IPC-4101. In addition, Microtek Laboratories China has the capability of temperature and humidity calibration as recognized by CNAS. For more information, click here.
Share on:
Suggested Items
The Evolution of Picosecond Laser Drilling
06/19/2025 | Marcy LaRont, PCB007 MagazineIs it hard to imagine a single laser pulse reduced not only from nanoseconds to picoseconds in its pulse duration, but even to femtoseconds? Well, buckle up because it seems we are there. In this interview, Dr. Stefan Rung, technical director of laser machines at Schmoll Maschinen GmbH, traces the technology trajectory of the laser drill from the CO2 laser to cutting-edge picosecond and hybrid laser drilling systems, highlighting the benefits and limitations of each method, and demonstrating how laser innovations are shaping the future of PCB fabrication.
Day 2: More Cutting-edge Insights at the EIPC Summer Conference
06/18/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) summer conference took place this year in Edinburgh, Scotland, June 3-4. This is the third of three articles on the conference. The other two cover Day 1’s sessions and the opening keynote speech. Below is a recap of the second day’s sessions.
Day 1: Cutting Edge Insights at the EIPC Summer Conference
06/17/2025 | Pete Starkey, I-Connect007The European Institute for the PCB Community (EIPC) Summer Conference took place this year in Edinburgh, Scotland, June 3-4. This is the second of three articles on the conference. The other two cover the keynote speeches and Day 2 of the technical conference. Below is a recap of the first day’s sessions.
Preventing Surface Prep Defects and Ensuring Reliability
06/10/2025 | Marcy LaRont, PCB007 MagazineIn printed circuit board (PCB) fabrication, surface preparation is a critical process that ensures strong adhesion, reliable plating, and long-term product performance. Without proper surface treatment, manufacturers may encounter defects such as delamination, poor solder mask adhesion, and plating failures. This article examines key surface preparation techniques, common defects resulting from improper processes, and real-world case studies that illustrate best practices.
RF PCB Design Tips and Tricks
05/08/2025 | Cherie Litson, EPTAC MIT CID/CID+There are many great books, videos, and information online about designing PCBs for RF circuits. A few of my favorite RF sources are Hans Rosenberg, Stephen Chavez, and Rick Hartley, but there are many more. These PCB design engineers have a very good perspective on what it takes to take an RF design from schematic concept to PCB layout.