Global Citizenship: Cultivating Cross-border Partnerships With Integrity
Nolan’s Notes: Moving Forward With Confidence
The Knowledge Base: Beyond the Badge—Why Membership Matters More Than Ever
Kolb Intros Next-gen Stencil Cleaning Technology
July 27, 2018 | Kolb Cleaning TechnologyEstimated reading time: 1 minute
Kolb Cleaning Technology has released the AQUBE MV8 sTWIN, a stencil cleaning system featuring dual process chambers with independent operating control. The AQUBE MV8 sTWIN is capable of cleaning one or two stencils immediately following a cleaning cycle (in parallel) or one stencil immediately and another stencil or squeegee(s) later (sequentially), making the MV8 sTWIN suitable for large-scale manufacturing or flexible enough for low-volume, high-mix production environments.
With a capacity of up to two stencils (900 x 800 x 50 mm or 35" x 32"), the MV8 sTWIN is a fully automatic, four-step processing system with cleaning, MediumWipe, rinsing and patented CWA (compressed warm air) drying in the same process chamber; this equates to a short cycle time of approximately 5 min (normal contamination) per stencil.
The Kolb AQUBE MV8 sTWIN is the next generation in cleaning systems, pre-equipped for extended water management and is Smart Factory ready for integration in Industry 4.0 production. The system is certified for both energy and water saving processes, ease of operation, and built-in comprehensive safety features.
About Kolb Cleaning Technology
Kolb Cleaning Technology is headquartered in Willich, Germany with offices in the United States (Longmont, CO) and Asia Pacific (Australia). Kolb is recognized as an innovative manufacturer of aqueous cleaning systems providing full process cleaning solutions for the electronics manufacturing industry.
Share on:
Suggested Items
BEST Inc. Introduces StikNPeel Rework Stencil for Fast, Simple and Reliable Solder Paste Printing
06/02/2025 | BEST Inc.BEST Inc., a leader in electronic component rework services, training, and products is pleased to introduce StikNPeel™ rework stencils. This innovative product is designed for printing solder paste for placement of gull wing devices such as quad flat packs (QFPs) or bottom terminated components.
KYZEN to Focus on Aqueous Cleaning and Stencil Cleaning at SMTA Juarez
05/20/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Juarez Expo and Tech Forum, scheduled to take place Thursday, June 5 at the Injectronics Convention Center in Ciudad Jarez, Chihuahua.
KYZEN to Spotlight Stencil Cleaning Solutions at SMTA Oregon
05/02/2025 | KYZEN'KYZEN, the global leader in innovative environmentally friendly cleaning chemistries, will exhibit at the SMTA Oregon Expo & Tech Forum, scheduled to take place on Tuesday, May 20 at the Wingspan Event and Conference Center in Hillsboro, OR. KYZEN’s cleaning expert Jeff Deering will be on-site at the expo providing information about stencil cleaning chemistries, including KYZEN E5631J.
KYZEN to Feature Stencil Cleaning and Aqueous Cleaners at SMTA Capital Expo and Tech Form
04/28/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Capital Expo and Tech Forum, scheduled to take place Thursday, May 8 at George Mason University – Mason Square in Arlington, VA.
KYZEN Focuses on Aqueous Cleaning and Stencil Cleaning at SMTA Wisconsin
04/24/2025 | KYZEN'KYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Wisconsin Expo and Tech Forum, scheduled to take place Tuesday, May 6 at the Crowne Plaza Milwaukee Airport. KYZEN will be on-site to provide attendees with information about aqueous cleaning chemistry AQUANOX A4618 and stencil cleaner KYZEN E5631J.