The Marketing Minute: If Your Marketing Budget Gets Cut in Half, Then What?
Punching Out: How Are the Big Boys in Electronics Doing?
It’s Only Common Sense: Complexity Is the Enemy of Profit
Innovative Circuits Relies on SCHMID’s InfinityLine
August 28, 2018 | Innovative CircuitsEstimated reading time: 2 minutes
To increase its production capacity Innovative Circuits has ordered a new alkaline etching line with tin stripper as well as a resist-stripper machine from the equipment manufacturer SCHMID. With the acquisition of the new production equipment the American bare-board PCB supplier is strengthening its technological advance and secures a long-term planning security.
Both systems will be manufactured in SCHMID’s optimized InfinityLine design, which is the combination and innovative optimization of previous SCHMID CombiLine and PremiumLine. The InfinityLine adopts for instance the small passage slots from CombiLine or the spray manifold connection from PremiumLine and combined the advantages of both modular systems.
The SCHMID alkaline etching line permits a much higher accuracy over the etched surface and therefore an optimized geometry of the etching foot. The Fineline spray system and the intermittent etching with single nozzle control enable an etching process with qualities that were considered hard to achieve until recently.
“The new SCHMID equipment enables uniform etching pattern and line/space structures in circuit boards with an etching factor capability superior to previous offerings,” says Dale Lovell, Chief Engineer at Innovative Circuits.
Moreover, the alkaline InfinityLine etching module considerably reduces the scrap rate and the amount of reworking in the etching technology sector. Depending on the production lot, the system automatically adjusts the parameters required for processing and closely maintains the correct chemical parameters. Product-specific recipes can be stored and hence set-up times reduced.
“We have made technological improvements with regard to chemical carryover, filtration and dosing accuracy. The machine availability has been further increased and the very compact and user-friendly design makes our equipments easily accessible for maintenance,” says Fred Johnson, Director Sales North America, Business Unit Electronics at SCHMID. Above all, the reproducibility of the etching which results from the recipes stored in the system gives Innovative Circuits a distinctive competitive advantage.
Innovative Circuits
Innovative Circuits, based out of metro Atlanta, is a fabricator of high reliability printed circuit boards. Since 1998 Innovative has supported defense, aerospace and commercial applications with solutions that meet the most demanding challenges. Innovative Circuits is ITAR registered and ISO 9001:2015 certified for fabrication of complex rigid, teflon, flex, and rigid-flex circuitry. For additional information please click here.
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
I-Connect007 Releases The Printed Circuit Designer’s Guide to… Direct Metallization: A Guide to Complex PCB Fabrication
05/15/2026 | I-Connect007As PCB complexity continues to accelerate, fabricators and OEMs are reevaluating long-standing manufacturing processes to meet the demands of AI, HDI, advanced packaging, and next-generation electronics. To address these evolving challenges, I-Connect007 is proud to announce the release of The Printed Circuit Designer’s Guide to… Direct Metallization: A Guide to Complex PCB Fabrication, authored by MacDermid Alpha Solution’s Carmichael Gugliotti.
Driving Innovation: Selecting the Right Laser Source
04/28/2026 | Simon Khesin -- Column: Driving InnovationWhen I first joined Schmoll Maschinen, I brought experience from almost every PCB process, except for laser. As I immersed myself in laser processing, I realized why it can seem so daunting to a newcomer. The complexity arises from three intersecting factors: A vast variety of laser sources: CO2, UV-nano, green-pico, UV-pico, IR-pico, and others; a diverse range of applications: Drilling, cutting, ablation, and more; and an extensive list of materials: These have vastly different absorption rates. Choosing the right machine or laser source is rarely trivial. Even for experienced engineers, answering "Which source is best?" requires examining the business's specific goals.
Institute of Circuit Technology Spring Seminar 2026: A Bright Future in Europe
04/23/2026 | Pete Starkey, I-Connect007Through the leafy lanes and spring flowers of Warwickshire and back to Meridan, the traditional centre of England, and now officially part of the Metropolitan Borough of Solihull in the county of the West Midlands, I attended the Annual General Meeting and Spring Seminar of the Institute of Circuit Technology (ICT) on April 14. Out of the AGM came notable changes in leadership at the top of the Institute: the retirement of Mat Beadel as chair and Emma Hudson as technical director. Effective May 1, Steve Driver is the new chair, and Alun Morgan is the new technical director.
ACCM Unveils Negative and Near-zero CTE Materials for Large-Format AI Chips
04/21/2026 | Advanced Chip and Circuit MaterialsAdvanced Chip and Circuit Materials, Inc. (ACCM) has launched two new materials: Celeritas HM50, with a negative coefficient of thermal expansion (CTE) of -8 ppm/°C to offset the positive CTE and expansion of copper with temperature on circuit boards, and Celeritas HM001, with near-zero CTE and the low-loss performance needed for high-speed signal layers to 224 Gb/s and faster in artificial intelligence (AI) circuits.
Fresh PCB Concepts: Designing PCBs for Harsh Environments—Reliability Is Engineered Upstream
04/23/2026 | Team NCAB -- Column: Fresh PCB ConceptsWhen engineers hear the phrase “harsh environment,” they usually think of the extreme temperature swings, vibration and shock, pressure changes, or radiation in aerospace. However, aerospace is not the only harsh environment where electronic assemblies must survive. Automotive power electronics, downhole oil and gas tools, marine controls, rail systems, defense platforms, and industrial automation equipment all expose PCBs to environments that are equally unforgiving. The stress mechanisms may differ, but the physics does not.