Nolan’s Notes: Finding Your Sweet Spot
Standard of Excellence: Delivering Excellence—A Daily Goal
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
IPTE to Exhibit at electronica 2018
September 27, 2018 | IPTEEstimated reading time: 1 minute
IPTE will exhibit with an own booth (hall A3, number 565) on the upcoming electronica 2018 (November 13-16) in Munich, Germany. IPTE’s main focus at the exhibition will be “smarTEST Solution“. Due to that, efficient equipment will be shown—Fast test and board handling, 3D Vision check to verify pins in a connector and a battery charger/discharger for e-automotive.
Furthermore, IPTE is present at the booth of elowerk (hall A3, number 149). In this showcase a IPTE 19 inch multifunctional test handler (MFT) works in combination with an the circuit tester Z1 from elowerk, a speed optimized solution for test handling and in circuit test.
At the IPTE booth:
Two IPTE easy test handlers (ETH) with bypass transport in combination with multi magazine loader/unloader MLL 3P and MLU 3P (one of each) will show fast test and board handling. Thanks to the bypass transport of the ETH, conveying can be done while testing the boards. Due to this, the cycle time is optimized. In addition, this solution shows how versatile and fast the IPTE components can be used.
The 3D Vision check is used to check pins in connectors to see if all pins are straight, inline and have the right length.
E-mobility is gaining importance. This means also the need to charge and discharge batteries. IPTE will show an innovative contacting unit for a specific test system at electronica in Munich.
About IPTE
IPTE was founded 1992 in Belgium. IPTE is a worldwide supplier for individual, flexible and high-technology automated product equipment. The company designs standard machinery and turnkey-automation systems of all kinds for production, test and further processing of printed-circuit boards, as well as of board assemblies and final products. IPTE runs eleven sites in Europe, America and Asia with currently more than 800 employees. The IPTE Group's client list includes considerable manufacturers of the telecommunications industry, the consumer electronics branch, the industrial and motor vehicle electronics as well as producers from the assembly technology and the manufacturing sector. IPTE’s headquarters is located in Genk, Belgium. Other important sites are located in Germany and France.
Share on:
Suggested Items
Meet the Author Podcast: Martyn Gaudion Unpacks the Secrets of High-Speed PCB Design
07/10/2025 | I-Connect007In this special Meet the Author episode of the On the Line with… podcast, Nolan Johnson sits down with Martyn Gaudion, signal integrity expert, managing director of Polar Instruments, and three-time author in I-Connect007’s popular The Printed Circuit Designer’s Guide to... series.
TTCI Joins Printed Circuit Engineering Association to Strengthen Design-to-Test Collaboration and Workforce Development
07/09/2025 | The Test Connection Inc.The Test Connection Inc. (TTCI), a leading provider of electronic test and manufacturing solutions, is proud to announce its membership in the Printed Circuit Engineering Association (PCEA), further expanding the company’s efforts to support cross-functional collaboration, industry standards, and technical education in the printed circuit design and manufacturing community.
Study on Resonance Mitigation in Metallic Shielding for Integrated Circuits
07/08/2025 | Article by Maria Cuesta Martin, Victor Martinez, Vidal Gonzalez Aguado, Würth ElektronikInherent cavity resonant modes often lead to significant degradation of shielding effectiveness, responsible for unwanted electromagnetic coupling. Cavity resonant modes of the metal shielding enclosure can produce two adverse problems: the mutual coupling among different RF modules and shielding effectiveness reduction of the metal enclosure. The cabinets serve to shield certain components from electromagnetic interference (EMI). However, these cavities present some resonance peaks at 5 GHz, making it impossible to use them at higher frequencies.
The Global Electronics Association Releases IPC-8911: First-Ever Conductive Yarn Standard for E-Textile Application
07/02/2025 | Global Electronics AssociationThe Global Electronics Association announces the release of IPC-8911, Requirements for Conductive Yarns for E-Textiles Applications. This first-of-its-kind global standard establishes a clear framework for classifying, designating, and qualifying conductive yarns—helping to address longstanding challenges in supply chain communication, product testing, and material selection within the growing e-textiles industry.
Magnalytix and Foresite to Host Technical Webinar on SIR Testing and Functional Reliability
06/26/2025 | MAGNALYTIXMagnalytix, in collaboration with Foresite Inc., is pleased to announce an upcoming one-hour Webinar Workshop titled “Comparing SIR IPC B-52 to Umpire 41 Functional & SIR Test Method.” This session will be held on July 24, 2025, and is open to professionals in electronics manufacturing, reliability engineering, and process development seeking insights into new testing standards for climatic reliability.