The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Nordson SELECT to Exhibit Award Winning Selective Soldering Technology at SMTAI
October 11, 2018 | Nordson SELECTEstimated reading time: 1 minute
Nordson SELECT, a Nordson company, is pleased to announce it will exhibit its award-winning selective soldering technologies in Booth 410 at the SMTA International 2018, scheduled to take place October 16-17, 2018 at the Donald Stephens Convention Center in Rosemont, Illinois.
On exhibit will be the Cerno 103IL a fully-configured SMEMA compatible selective soldering system equipped with standard features including interchangeable solder pots and pumps compatible with tin-lead, lead-free and HMP solder alloys. The Cerno 103IL comes standard with an automated fiducial location and correction system that provides single click fiducial teach capability, seamless fiducial recognition and true automated alignment and skew correction of a printed circuit board. Also available is an optional in-line flux and preheat module with concurrent fluxing and preheating that provides significantly increased production throughput.
Also on display will be the Novo 300 which is an entry level selective soldering platform with a compact footprint requiring less than 1.1 square meters of factory floor space. The Novo 300 is a standalone platform that is ideally suited for prototype, cell manufacturing or small batch production. The Novo 300 has a full titanium solder pot compatible with all solder alloys plus easy tool-free maintenance, and has the capability to solder printed circuit boards at the same speed as larger more expensive machines.
About Nordson SELECT
Nordson SELECT, is a leading worldwide supplier of selective soldering systems including Novo standalone machines offering exceptional value and superior process capability ideal for batch production, Cerno in-line systems delivering uncompromised quality and productivity for demanding soldering applications, and Integra multi-station modular systems designed to meet the most challenging high-volume requirements by combining parallel processing with multiple soldering nozzles for the ultimate in flexibility and maximum throughput. To find out more, click here.
About Nordson Corporation
Nordson Corporation engineers, manufactures and markets differentiated products and systems used to dispense, apply and control adhesives, coatings, polymers, sealants, biomaterials, and other fluids, to test and inspect for quality, and to treat and cure surfaces. These products are supported by application expertise and direct global sales and service. Nordson serves a wide variety of consumer non-durable, durable and technology end markets including packaging, nonwovens, electronics, medical, appliances, energy, transportation, construction, and general product assembly and finishing. Founded in 1954 and headquartered in Westlake, Ohio, the company has operations and support offices in nearly 40 countries. Visit Nordson on the web here.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.