Standard of Excellence: Delivering Excellence—A Daily Goal
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
The Knowledge Base: Building the Workforce of Tomorrow With EMAC
Goepel's Predictive Maintenance for Inline AXI System
November 9, 2018 | GOEPEL ElectronicEstimated reading time: 1 minute
Goepel electronic's X Line · 3D X-ray system is getting a new app in its machine software that provides the ability for a system to create usage-based maintenance plans and monitor itself independently (preventive/predictive maintenance).
Self-diagnosis with predictive and preventive maintenance management ensures stable machine conditions and repeatable, consistent performance. Every key component of the machine is monitored and a detailed maintenance overview is created. A preventive maintenance plan reduces machine downtime and thus costs.
In practice, it is no longer necessary to work according to fixed maintenance cycles (weekly/monthly/annually). Instead, use-related values such as axis kilometers travelled, pneumatic strokes performed and beam hours of the X-ray source are monitored. These values are provided with a warning and service threshold. If the warning threshold is exceeded, preventive maintenance can be planned. Furthermore, the current consumption of the axis systems is also monitored. Increased current consumption is usually due to an increased coefficient of friction in the axis mechanism. In the case of a fixed maintenance cycle, this would possibly be detected too late. However, targeted monitoring enables maintenance measures to be initiated in time.
The previous service booklet with maintenance plan and protocol is completely digitized with the new app. This provides more transparency and enables simultaneous monitoring of several machines at a glance, making maintenance easier to plan and reducing downtime.
The new Service & Maintenance app is available in the machine software PILOT Inspect Version 3.4 for the inline X-ray system X Line · 3D.
Share on:
Suggested Items
Driving Innovation: Direct Imaging vs. Conventional Exposure
07/01/2025 | Simon Khesin -- Column: Driving InnovationMy first camera used Kodak film. I even experimented with developing photos in the bathroom, though I usually dropped the film off at a Kodak center and received the prints two weeks later, only to discover that some images were out of focus or poorly framed. Today, every smartphone contains a high-quality camera capable of producing stunning images instantly.
Specially Developed for Laser Plastic Welding from LPKF
06/25/2025 | LPKFLPKF introduces TherMoPro, a thermographic analysis system specifically developed for laser plastic welding that transforms thermal data into concrete actionable insights. Through automated capture, evaluation, and interpretation of surface temperature patterns immediately after welding, the system provides unprecedented process transparency that correlates with product joining quality and long-term product stability.
United Electronics Corporation Advances Manufacturing Capabilities with Schmoll MDI-ST Imaging Equipment
06/24/2025 | United Electronics CorporationUnited Electronics Corporation has successfully installed the advanced Schmoll MDI-ST (XL) imaging equipment at their advanced printed circuit board facility. This significant technology investment represents a continued commitment to delivering superior products and maintaining their position as an industry leader in precision PCB manufacturing.
IBM, RIKEN Unveil First IBM Quantum System Two Outside of the U.S.
06/24/2025 | IBMIBM and RIKEN, a national research laboratory in Japan, today unveiled the first IBM Quantum System Two ever to be deployed outside of the United States and beyond an IBM Quantum Data Center.
Excellon Installs COBRA Hybrid Laser at Innovative Circuits
06/23/2025 | ExcellonExcellon is pleased to announce the successful installation of a second COBRA Hybrid Laser System at Innovative Circuits, located in Alpharetta, Georgia. The Excellon COBRA Hybrid Laser System uniquely combines both UV and CO₂ (IR) laser sources on a single platform—making it ideal for high-density prototype and production printed circuit boards (PCBs).