Taiflex Posts 17% YoY Growth in FCCL Sales January-November 2018
December 17, 2018 | Stephen Las Marias, I-Connect007Estimated reading time: Less than a minute
Taiflex Scientific Co. Ltd, a Taiwan-based supplier of flexible copper-clad laminates (FCCL) and PV module backsheets, has reported consolidated revenues of NT$884 million ($28.68 million) for November, down by 3.8% month-on-month and down by 7.5% year-on-year.
The company's Electronic Materials Industry (EM) business posted total sales of NT$754 million ($24.46 million), down by 11.6% from the previous month, but up by 11.5% year-on-year. Cumulative sales from January to November 2018 reached NT$7.863 billion ($255 million), up by 16.64% compared with the same period last year.
Taiflex's PV Industry (PV) division posted total sales of NT$128 million ($4.15 million) for November, up by 150% from the previous month, but down by 53.6% from November last year. Total sales for January to November reached NT$1.127 billion ($36.57 million), down by 68% year-on-year.
Suggested Items
MKS’ Atotech to Participate in ECTC
05/10/2024 | MKS’ AtotechAt this year’s 74th IEEE Electronic Components and Technology Conference (ECTC), MKS’ Atotech will present and demonstrate its latest product and service innovations.
The Chemical Connection: Reducing Etch System Water Usage, Part 2
05/02/2024 | Don Ball -- Column: The Chemical ConnectionIn my last column, I reviewed some relatively simple ways to reduce water usage in existing etch systems: cutting down cooling coil water flow, adding chillers to replace plant water for cooling, lowering flow rate nozzles for rinses, etc. This month, I’ll continue with more ways to control water usage in your etcher. Most of these are not easily retrofittable to existing equipment but should be given serious consideration when new equipment is contemplated. With the right combination of add-ons, it is possible to bring the amount of water used in an etch system to almost zero.
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.