The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Indium Experts to Present at Pan Pacific Microelectronics 2019
January 10, 2019 | Indium CorporationEstimated reading time: 1 minute
Indium Corporation’s Dr. Ronald C. Lasky, senior technologist, and Jonas Sjoberg, associate director – global tech services, will present at Pan Pacific Microelectronics Symposium 2019 (PanPac) in Kauai, Hawaii, USA, February 11-14, 2019.
Dr. Lasky’s presentation, Tin Whiskers 101: Causes, Risks, and Mitigation 2019, will discuss the fundamentals of tin whiskers, the risks they pose in electronics assembly, and techniques to assess and mitigate tin whiskers.
Sjoberg’s presentation, Impact of Stencil Quality & Technology on Solder Paste Printing Performance, will examine the impact of increased miniaturization in packaging and board-level assembly as part of the internet of things (IoT), as well as how the resultant move to smaller and finer stencils affects solder paste printing.
Dr. Lasky, holder of the prestigious SMTA Founder’s Award, is a world-renowned process expert and Senior Technologist at Indium Corporation. He is also a Professor of Engineering and the Director of the Cook Engineering Design Center at Dartmouth College. He has more than 30 years of experience in electronics and optoelectronic packaging and assembly. Dr. Lasky has authored six books, and contributed to nine more on science, electronics, and optoelectronics. Additionally, he has served as an adjunct professor at several colleges, teaching more than 20 different courses on topics ranging from electronics packaging, materials science, physics, mechanical engineering and science, and religion. Dr. Lasky holds numerous patent disclosures and is the developer of several SMT processing software products relating to cost estimating, line balancing, and process optimization. He is the co-creator of engineering certification exams that set standards in the electronics assembly industry worldwide.
Sjoberg has more than 20 years of technical experience in the electronics assembly industry, including the deployment of leading-edge technologies for packaging and assembly, launching and managing research and development projects and facilities, and serving as a technical advisor to development and manufacturing sites worldwide. He earned his bachelor's degree in electrical engineering from Linköping University, Sweden.
About Indium Corporation
Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil. Founded in 1934, the company has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.