A Low-Cost, Durable Device to Harness Wave Energy
April 4, 2019 | CORDISEstimated reading time: 2 minutes
Ocean waves hold a tremendous amount of untapped energy that is more than capable of meeting the world’s electricity needs. However, electricity generation from waves has a number of drawbacks that make it economically unviable. Current marine constructions are costly, and it’s difficult to build a device robust enough to survive the harsh ocean environment.
A new wave energy technology developed with EU funding for the POLYWEC and WETFEET projects promises to overcome these obstacles. A European team of engineers working on these projects have created a durable device that could help generate low-cost electricity for thousands of homes in the coming years. Their research has been published in the journal Proceedings of the Royal Society A.
In their study, the engineers introduce a wave energy conversion system that’s equipped with an innovative electrostatic power take-off device known as a dielectric elastomer generator (DEG). The DEG is less costly than conventional designs and has no sliding or rolling moving parts. It’s also made of inexpensive soft hard-wearing materials that can withstand the harsh marine environment, unlike today’s steel electromagnetic generators.
How the Generator Works
The DEG uses flexible rubber membranes and fits on top of a vertical cylinder, in which the water level rises and falls with the motion of the waves. The water entering the cylinder pushes trapped air up, in this way expanding the membrane. At wave troughs, the water level drops, causing the membrane to compress. Because there’s dielectric material in the rubber membrane, a voltage is generated both when it expands and compresses. This process produces electricity. For commercial exploitation, this electricity would be carried to shore via underwater cables.
The DEG is designed to be incorporated into existing ocean energy systems. According to University of Edinburgh’s Professor David Ingram the air turbines and oscillating water columns of current systems could be replaced with the dielectric rubber membrane. “[Y]ou’re doing away with a fairly complex piece of electro-mechanical equipment and replacing it with a sheet of rubber and a fairly sophisticated set of power electronics so it should be easy to maintain” he stated in a news item posted on the Institution of Mechanical Engineers website.
A scaled-down version of the system was tested at the FloWave Ocean Energy Research Facility of the University of Edinburgh, a partner in both projects. The experiments showed that one full-size device could generate the equivalent of 500 kWh, enough electricity to power about 100 homes. The engineers believe that fleets of low-cost, easy-to-maintain devices could be installed in Scottish waters within decades. “Wave energy is a potentially valuable resource around Scotland’s coastline, and developing systems that harness this could play a valuable role in producing clean energy for future generations,” said Prof. Ingram.
Suggested Items
Scrutinizing Solder Printing
09/10/2024 | Nolan Johnson, I-Connect007As members of the technical staff at Indium, Adam Murling, technical manager, and Ron Lasky, senior technologist and professor at Dartmouth University, know their way around metallurgy and solder formulation. I corralled them for a conversation on solder application techniques from the solder’s perspective and their insights did not disappoint.
iPhone 16 Series to Feature A18 Processor, Pricing May Match iPhone 15
09/10/2024 | TrendForceTrendForce reports that Apple's upcoming iPhone 16 series will be powered by the new A18 and A18 Pro processors and will feature a comprehensive DRAM upgrade to support Apple Intelligence.
Young Professionals Spotlight: Process Engineer Kevin Dial, American Standard Circuits
09/05/2024 | Dan Beaulieu, D.B. Management GroupWhen I heard that my friends at American Standard Circuits had hired a new, fresh-out-of-college process engineer, I was anxious to meet him. Now, you get to read this interview. It’s a rare perspective of a young man new to our industry.
University Researchers Help Develop AI-Powered Drones to Prevent Wildfires
08/27/2024 | University of BristolA University of Bristol professor has joined forces with Lancashire Fire and Rescue and Windracers to test a swarm of self-coordinating drones for firefighting, as part of an effort to develop cost-effective early mitigation strategies for wildfires.
My Drop Shock Testing Experiments to Determine Reliability in PCBs
08/14/2024 | Palash Vyas, Ph.D, Graduate Research AssistantTablets, digital cameras, and smartphones are portable electronics that have become increasingly popular. Compact design and improved functionality are common product and package design trends. However, because they are portable, these devices may fall and cause internal damage. In addition, customers may use products in different environments, exposing them to risks that could cause harm. For example, a smart device such as a phone or tablet could be dropped while being used, or a warehouse shipment could be handled carelessly and fall. Products must have sufficient mechanical shock reliability to reduce the likelihood of damage.