UBC Researchers Create Washable Sensor That Can Be Woven Into Materials
May 17, 2019 | University of British ColumbiaEstimated reading time: 2 minutes
Forget the smart watch. Bring on the smart shirt.
Researchers at UBC Okanagan’s School of Engineering have developed a low-cost sensor that can be interlaced into textiles and composite materials. While the research is still new, the sensor may pave the way for smart clothing that can monitor human movement.
The embedded microscopic sensor is able to recognize local motion through the stretching of the woven yarns that are treated with graphene nanoplatelets that can read the body’s activity, explains Engineering Professor Mina Hoorfar.
“Microscopic sensors are changing the way we monitor machines and humans,” says Hoorfar, lead researcher at the Advanced Thermo-Fluidic Lab at UBC’s Okanagan campus. “Combining the shrinking of technology along with improved accuracy, the future is very bright in this area.”
This ‘shrinking technology’ uses a phenomenon called piezo-resistivity—an electromechanical response of a material when it is under strain. These tiny sensors have shown a great promise in detecting human movements and can be used for heart rate monitoring or temperature control, explains Hoorfar.
Her research, conducted in partnership with UBC Okanagan’s Materials and Manufacturing Research Institute, shows the potential of a low-cost, sensitive and stretchable yarn sensor. The sensor can be woven into spandex material and then wrapped into a stretchable silicone sheath. This sheath protects the conductive layer against harsh conditions and allows for the creation of washable wearable sensors.
While the idea of smart clothing—fabrics that can tell the user when to hydrate, or when to rest—may change the athletics industry, UBC Professor Abbas Milani says the sensor has other uses. It can monitor deformations in fibre-reinforced composite fabrics currently used in advanced industries such as automotive, aerospace and marine manufacturing.
The low-cost stretchable composite sensor has also shown a high sensitivity and can detect small deformations such as yarn stretching as well as out-of-plane deformations at inaccessible places within composite laminates, says Milani, director of the UBC Materials and Manufacturing Research Institute.
The testing indicates that further improvements in its accuracy could be achieved by fine-tuning the sensor’s material blend and improving its electrical conductivity and sensitivity This can eventually make it able to capture major flaws like “fibre wrinkling” during the manufacturing of advanced composite structures such as those currently used in airplanes or car bodies.
“Advanced textile composite materials make the most of combining the strengths of different reinforcement materials and patterns with different resin options,” he says. “Integrating sensor technologies like piezo-resistive sensors made of flexible materials compatible with the host textile reinforcement is becoming a real game-changer in the emerging era of smart manufacturing and current automated industry trends.”
The research, published recently in Small was conducted by researchers at the Composites Research Network and the Advanced Thermo-Fluidic Lab with funding from the Natural Sciences and Engineering Research Council.
About UBC's Okanagan Campus
UBC’s Okanagan campus is an innovative hub for research and learning in the heart of British Columbia’s stunning Okanagan Valley. Ranked among the top 20 public universities in the world, UBC is home to bold thinking and discoveries that make a difference. Established in 2005, the Okanagan campus combines a globally recognized UBC education with a tight-knit and entrepreneurial community that welcomes students and faculty from around the world.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/10/2024 | Marcy LaRont, PCB007 MagazineSpring is a renewal each year as dormant flora bloom, and baby ducklings and geese are ever present in local bodies of water. Even though it is beginning to get hot, I love this time of year in Arizona, with the sun waking me around 5 a.m. It fills me with an energy that I often lose in the dark winter months. Wherever you find yourself in the world, I hope you are enjoying Spring and that you are filled with energy and enthusiasm for all the great work part of our daily lives in this industry.
ViTrox Presents Next-Gen Intelligent Manufacturing Solutions at SEMICON Southeast Asia 2024
05/10/2024 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is pleased to announce its participation as an exhibitor and Platinum sponsor at SEMICON Southeast Asia 2024! Join us from May 28-30 at Booth #1504 in Malaysia International Trade and Exhibition Centre (MITEC), KL, to experience our advancement in technology and manufacturing.
Podcast Review: On the Line with… Designing for Reality
05/09/2024 | Duane Benson, Positive Edge LLCAs a technologist, if I were forced to come up with just one recurring theme that I might call a professional “nemesis,” it would be the difference between theory and reality. A lot of technology we have at our disposal works well in theory but falls short when reality hits. That’s not the only reason I chose to listen to and review On the Line with… Designing for Reality, featuring a series of conversations with ASC Sunstone’s Matt Stevenson, but it certainly helped that the title caught my eye.
NEOTech Positions Itself as Microelectronics Industry Leader with High-Technology Investments
05/09/2024 | NEOTechNEOTech, a leading provider of electronic manufacturing services (EMS), design engineering, and supply chain solutions in the high-tech industrial, medical device, and aerospace/defense markets, announces a significant investment in acquiring new Palomar 8100 wire bonder machines, enhancing the company’s positioning as a leader of cutting-edge microelectronics assemblies for mission-critical applications.
MKS’ Atotech, ESI to Participate in CPCA Show
05/09/2024 | MKS’ AtotechMKS’ Atotech, and ESI will participate in the CPCA Show 2024. The show will be held from May 13 to 15, 2024, at the National Exhibition and Convention Center (Shanghai) and will bring together domestic and international manufacturers in the electronic circuit industry.