The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Indium Expert to Present at 2019 ICEPT
August 2, 2019 | Indium CorporationEstimated reading time: 1 minute
Indium Corporation’s Dr. Ning-Cheng Lee, vice president of technology, will share his industry expertise at the 20th International Conference on Electronic Packaging Technology (ICEPT 2019) on August 11-15, Hong Kong, China.
Fluxes Suppressing Non-Wet-Open during BGA Assembly will examine the increasing severity of warpage and non-wet-open (NWO) defects during BGA assembly due to the continuing advancement of miniaturization. He will discuss how a “cold-welding barrier” method utilizing a flux coating has been developed to suppress NWO defects.
He will also present Novel Fluxes with Decreased Viscosity after Reflow for Flip-Chip and SIP Assembly, which discusses the development of fluxes developed for flip-chip and system-in-package (SIP) assembly. These fluxes have high-viscosity and high-tack to secure components during placement and reflow, but have low-viscosity after reflow to allow the flux residue to be cleaned.
Dr. Lee will also present the short course Achieving High Reliability for Lead-Free Solder Joints – Materials Consideration. This very popular course details the material considerations required for achieving high-reliability in lead-free solder joints. The goal of this course is to provide participants with the understanding of how various factors contribute to failure modes, and how to select proper solder alloys and surface finishes for achieving high-reliability.
Dr. Lee is a world-renowned soldering expert, an SMTA Member of Distinction, and IEEE Fellow. He has extensive experience in the development of fluxes, alloys and solder pastes for SMT industries, and extensive experience in the development of high-temperature polymers, encapsulants for microelectronics, underfills, and adhesives. In addition to SMT and semiconductor soldering materials, his research also extends to nanobonding technology and thermal conductive materials.
About Indium Corporation
Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include
solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil. Founded in 1934, Indium has global technical support and factories located in China, India, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.
For more information about Indium Corporation, visit www.indium.com
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.