The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Nordson ASYMTEK's Qadence Closed-loop Flow Control Automatically Compensates for Viscosity Changes during Conformal Coating
October 15, 2019 | Nordson ASYMTEKEstimated reading time: 2 minutes
Nordson ASYMTEK introduces Qadence, a closed-loop system that automatically compensates for viscosity changes during conformal coating. This innovative system combines the capabilities of Nordson ASYMTEK's conformal coating hardware and software to selectively apply coating to specific areas of a circuit board consistently throughout production. The Qadence flow control system maintains stable fluid application, flow rates, and performance by automatically compensating for viscosity changes related to temperature, humidity, and batch-to-batch variation. It eliminates the need for frequent operator adjustments and downtime to recalibrate the process.
The Qadence flow control system ensures the quality of the coating application with set process limits to achieve target flow rates and precise application volumes. After process limits are set, target flow rates are continuously monitored for adherence throughout production. If the process falls outside precise application volumes, a control routine (patent pending) is activated to make corrective adjustments - reducing downtime and limiting operator intervention. The flow meter and tighter resolution result in accurate and tighter process controls. Traceability is built in as data and measurements are tracked and can be exported and evaluated by SPC software.
Qadence software is easy to use and implement. After the user enters process parameters and sets other performance limits, the Flow Calculator in Nordson ASYMTEK's EasyCoat 6 software quickly calculates the target flow rate. A normal 1-hour setup can be completed in 30 minutes and a 30-minute setup in less than 10 minutes. Each valve is separately controlled. Matching flow rates between applicators enables similar valve performance when changing valves or across two valves in a single application.
Automated process controls increase machine up-time and throughput and reduce the cost of operation. When flow rates are optimized, more precise volumes are dispensed and less fluid is wasted. Improved coating accuracy and reliability reduce the need for masking and rework.
The Qadence system is compatible with the Select Coat SL-940 conformal coating system, EasyCoat 6 software, and Nordson ASYMTEK conformal coating applicators.
"The conformal coating fluid selected for a particular process is important," explained Camille Sybert, product marketing engineer, Nordson ASYMTEK, "but the system that dispenses that coating is what maximizes coating performance. The manufacturing environment rarely remains constant, with temperature and humidity changes affecting the viscosity of the fluid. Nordson ASYMTEK's new Qadence flow control system ensures that the fluid is dispensed at the flow rate intended for best coverage and stabilizes the conformal coating process."
About Nordson ASYMTEK
Nordson ASYMTEK has taken the lead for 35+ years to advance fluid dispensing, conformal coating, and jetting technologies. Focused on immediate and long-term possibilities, ASYMTEK continuously innovates as technology and electronics applications evolve. By focusing on what's possible, we bring more to our customers through innovative solutions, customization, applications expertise, and award-winning global support. Visit us at www.NordsonASYMTEK.com, or on social media.
About Nordson Corporation
Nordson Corporation is one of the world's leading producers of precision dispensing equipment that applies adhesives, sealants, coatings and other materials to a broad range of consumer and industrial products during manufacturing operations. The company also manufactures equipment used in the testing and inspection of electronic components as well as technology-based systems for curing and surface treatment processes. Headquartered in Westlake, Ohio, Nordson has direct operations and sales support offices in more than 30 countries.
Share on:
Suggested Items
Solar Powered Aircraft Achieves New Stratospheric Success
12/26/2024 | BAE SystemsA British-led team of engineers has taken a leap forward in the race to harness the stratosphere for earth observation and communications, completing a new series of test flights of BAE Systems’ High Altitude Pseudo Satellite (HAPS) Uncrewed Aerial System (UAS), PHASA-35®, in quick succession.
Modernizing TAURUS for the Bundeswehr
12/25/2024 | MBDAThe Bundeswehr and TAURUS Systems GmbH (a joint venture between MBDA and SAAB) have signed a contract for the maintenance and modernization of the TAURUS stand-off weapon system. The measures will ensure the weapon's operational readiness until at least 2045.
SIA Statement on Biden Administration’s Launch of Section 301 Trade Investigation Related to China’s Targeting of the Semiconductor Industry for Dominance
12/25/2024 | SIAThe Semiconductor Industry Association (SIA) released the following statement from SIA President and CEO John Neuffer regarding the Biden administration’s decision to launch a Section 301 trade investigation focused on China’s acts, policies, and practices related to targeting of the semiconductor industry for dominance.
Two Additional Boeing O3b mPOWER Satellites Successfully Communicating in Space
12/23/2024 | BoeingTwo more Boeing-built O3b mPOWER satellites are sending and receiving signals in space after launching from the Kennedy Space Center, Florida at 5:26 p.m.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.