The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
BTU International Recognized by Mexico Technology Awards for Aqua Scrub Flux Management Technology
October 24, 2019 | BTU International, Inc.Estimated reading time: 1 minute
BTU International, Inc. was awarded a 2019 Mexico Technology Award in the category of Soldering – Reflow for its Aqua Scrub Flux Management Technology. The award was presented to the company during a Wednesday, October 23, 2019, ceremony that took place during the SMTA Guadalajara Expo & Tech Forum.
Aqua Scrub Technology is BTU’s next-generation solder reflow flux management system. With a very attractive cost of ownership, it is designed to decrease operational costs by 4X compared to traditional condensation systems. Reduction in cost can be attributed to reduced downtime, labor and disposal costs.
“We are so pleased that the Aqua Scrub was recognized in Guadalajara,” said Paul Lancaster, director of sales, Americas for BTU International. “This innovative system has been successfully adopted by multiple high-volume EMS customers who have long battled the problem of flux related to oven maintenance. We believe this is a game-changing technology.”
The patent-pending design uses an aqueous-based scrubber technology compatible with the most known paste and flux types. The flux and solution are automatically contained and packaged for disposal. Aqua Scrub is purpose-built as a stand-alone system that can be easily retrofitted on PYRAMAX reflow ovens already in the field as well as being configured on new PYRAMAX ovens. This self-contained unit mounts on the backside of the oven to minimize the impact on oven operation and factory floor space.
The Mexico Technology Awards acknowledge the latest innovations available in Mexico produced by OEM manufacturing equipment and materials suppliers over the last 12 months.
About BTU International
BTU International, a wholly-owned subsidiary of Amtech Group (Nasdaq: ASYS), is a global supplier and technology leader of advanced thermal processing equipment in the electronics manufacturing market. BTU’s high-performance reflow ovens are used in the production of SMT printed circuit board assemblies and in semiconductor packaging processes. BTU also specializes in precision controlled, high-temperature belt furnaces for a wide range of custom applications, such as brazing, direct bond copper (DBC), diffusion, sintering and advanced solar cell processing. BTU has operations in North Billerica, Massachusetts, and Shanghai, China, with direct sales and service in the U.S.A., Asia, and Europe. Information about BTU International is available at www.btu.com.
For more information about BTU International, visit www.btu.com.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.