Dan's Biz Bookshelf: 'Revenge of the Tipping Point'
Marcy's Musings: Engineering Economics
Punching Out: Should You Sell Your Company to a Private Equity Firm?
iNEMI Webinar to Share Results of Wafer/Panel Level Fine Pitch Substrate Inspection/Metrology Project
February 19, 2020 | iNEMIEstimated reading time: 1 minute
The fine pitch substrate features of advanced packaging technologies such as SiP, 2.5D, etc., can directly impact yield and performance of the package. The Wafer/Panel Level Fine Pitch Substrate Inspection/Metrology project has been organized to address the need to identify and characterize the capabilities of inspection technologies that can enable faster inspection and process development and, ultimately, higher yield in high-volume production.
This webinar will share the findings and recommendations from Phase 2 of the project, which studied the available measurement capabilities for fine line.
In addition, the webinar will outline the plans for the next phase of the project, which will focus on fabrication and inspection of organic substrates, using the TV designs from Phase 2. The team, led by Feng Xue (IBM), Joe Zou (Intel) and Charles Reynolds (IBM), plans to evaluate and quantify the limitations of automatic optical inspection (AOI) for fine pitch and defect patterns on organic substrates, and compare them to other relevant inspection methodologies. For additional project information.
Webinar Registration
The Phase 2 end-of-project webinar is being combined with the Phase 3 call-for-participation webinar. Two sessions are scheduled and are open to members and non-members. Participants must register in advance — please click on the links below to register. For additional information, contact Masahiro Tsuriya (m.tsuriya@inemi.org)
Session 1 (APAC)
March 5
10:00 a.m. JST (Japan)
8:00 p.m. EST (USA) on March 4
5:00 p.m. PST (USA) on March 4
Session 2 (Americas and EMEA)
March 5
8:00 a.m. EST (USA),
2:00 p.m. CET (Europe)
10:00 p.m. JST (Japan)
Share on:
Suggested Items
Real Time with... electronica 2024: SPEA's AI Integration—Innovations in Test Equipment
11/25/2024 | Real Time with... electronicaIn this interview from electronica 2024, Pete Starkey speaks with Andrea Furnari, VP of Electronic Test Products Business Unit for SPEA. The discussion revolves around AI integration in test equipment, trends in substrate materials, and SPEA's focus on R&D.
TRI’s SEMI and SMT Inspection Solutions at NEPCON Japan 2025
11/15/2024 | TRITest Research, Inc. (TRI), the leading Test and Inspection systems provider for the electronics manufacturing industry, will join NEPCON Japan 2025, held at Tokyo Big Sight from January 22 – 24, 2025.
ViTrox Strengthens Its Mexico Presence with New Demo Room and Strategic Workforce Expansion
11/07/2024 | ViTroxYear 2024 marks a significant year of growth for ViTrox in Mexico. In collaboration with SMTo, ViTrox has successfully established a state-of-the-art demo room, enhancing its capabilities to deliver advanced solutions to customers. As part of its commitment to the region, ViTrox is also expanding its local workforce, underscoring its dedication to innovation and service excellence in Mexico’s thriving market.
iNEMI End-of-Project Webinar: Investigation of AI Enhancement to AOI for PCBA
11/06/2024 | iNEMIAutomated optical inspection (AOI) systems are essential in electronic manufacturing for ensuring the quality of printed circuit board assemblies (PCBAs).
ViTrox Showcases Groundbreaking Inspection Innovations at NEPCON Asia 2024
10/30/2024 | ViTroxViTrox, which aims to be the world’s most trusted technology company, is thrilled to announce its participation in NEPCON Asia 2024. The event will be held at Shenzhen World Exhibition & Convention Center (Bao’an) from November 6th to 8th at Hall 9, Booth #9E20.