The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
SMTA Interim President Announced
March 5, 2020 | SMTAEstimated reading time: 1 minute
The SMTA announced that Gregory Vance, Rockwell Automation, will serve as interim president through the current term ending in September 2020. The decision, made by the board of directors, comes after the resignation by current president, Jeff Kennedy, due to a conflict of interest outlined in the association bylaws which forbids two concurrent offices held by employees of the same company.
Jeff Kennedy recently accepted a position beginning March 16, 2020 with ZESTRON Americas, which employs another current board member, vice president of communications, Sal Sparacino. As such, Mr. Kennedy resigned as president effective March 3, 2020. Recently elected board member Robert Boguski, Datest, was voted by the board to assume duties as vice president of membership that was vacated by Mr. Vance as he takes on the interim president role. Mr. Boguski will also assume duties as chair of the Chapter Leadership Committee.
"I would like to thank the Board of Directors and the SMTA membership for all the ongoing support and well wishes. It has been an honor to serve the association over the past 10 years and I will remain an active member of the Technical Committee, SMTAI Committee, and continue to support the organization going forward! I have high confidence that Greg will get the same level of support from the membership as I had during my tenure as he takes on the interim president duties."
“I would like to personally thank Jeff Kennedy for his 10 years of service on the SMTA Board of Directors and President. Your dedication and insights have helped the SMTA grow in terms of educational programs, conferences, and Knowledge Base content,” said Greg Vance, Interim President. “On behalf of the SMTA Board of Directors, we wish you success in your new role.”
For questions, contact Executive Director Tanya Martin at +1-952-920-7682 or tanya@smta.org.
SMTA – A Global Association Working at a Local Level
The SMTA membership is an international network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies, including microsystems, emerging technologies, and related business operations.
Share on:
Suggested Items
Rogers Announces Addition of Woon Keat Moh to Board of Directors
12/23/2024 | Rogers CorporationRogers Corporation announced that Woon Keat Moh ("Moh") has been appointed as an independent member of the Company’s Board of Directors, effective January 1, 2025. Following this change, the Board will be composed of nine members, eight of whom are independent.
CACI Chairman, Michael A. Daniels, Receives Prestigious Lifetime Achievement Recognition from NACD
12/20/2024 | CACI International Inc.CACI International Inc announced that CACI Chairman of the Board of Directors Michael (Mike) A. Daniels was presented with the prestigious 2024 National Association of Corporate Directors (NACD) Directorship 100™ B. Kenneth West Lifetime Achievement Award at its annual gala in New York.
Aspocomp’s Shareholders’ Nomination Board’s proposals to the Annual General Meeting 2025
12/19/2024 | AspocompThe Shareholders’ Nomination Board of Aspocomp Group Plc submits the following proposals to the Annual General Meeting, planned to be held on April 29, 2025. The proposals will also be included in the Notice to the Annual General Meeting 2025 to be published at the later date.
Global PCB Connections: Following DFM Rules Leads to Better Boards
12/18/2024 | Jerome Larez -- Column: Global PCB ConnectionsAs a PCB field applications engineer, ensuring smooth communication between PCB designers and fabricators is one of my frequent challenges. A critical part of that dialogue is design for manufacturing (DFM). Many designers, even experienced ones, often misunderstand or overlook important DFM considerations. They may confuse design rules with manufacturing minimums, leading to technically feasible designs that are difficult or costly to produce. In this column, I will clarify some common DFM guidelines and help designers understand the difference between “design rules” and “minimums” while sharing best practices that will simplify the production process and ensure the highest quality PCB.
Cadence Appoints Moshe Gavrielov to Board of Directors
12/13/2024 | Cadence Design SystemsCadence Design Systems, Inc. announced the appointment of Moshe Gavrielov to its board of directors, effective January 1, 2025. Mr. Gavrielov currently serves as a member of the board of NXP Semiconductors N.V. and Taiwan Semiconductor Manufacturing Company Ltd., as chair of the board of Foretellix and SiMa.ai, and has previously held executive roles at several global technology companies.