The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Indium Corporation to Feature Automotive Products at SMTconnect
March 10, 2020 | Indium CorporationEstimated reading time: 1 minute
Indium Corporation will feature its high-reliability solder paste and innovative alloy pairing, which provides enhanced performance in automotive applications, at SMTconnect, May 5-7, Nuremberg, Germany.
Indium8.9HF Solder Paste is an industry-proven solder paste that delivers no-clean, halogen-free solutions designed to produce low-voiding, enhance electrical reliability, and improve stability during the printing process for high-reliability automotive electronics.
Indium8.9HF:
- Increases electrical reliability via enhanced surface insulation resistance (SIR) that inhibits current leakage and dendritic growth
- Ensures low-voiding on bottom termination components (ex. QFN, DPAK, LGA)
- Delivers supreme product stability with:
- Excellent response-to-pause, even after being left on the stencil for 60 hours
- Enhanced printing and reflow performance after remaining at room temperature for one month
- Consistent printing performance for up to 12 months when refrigerated
- Offers excellent pin-in-paste and through-hole solderability
- Resists premature flux spread to prevent surfaces from oxidizing
- Performs with both Pb and Pb-free alloys.
Indalloy®292 is an innovative alloy engineered to provide advanced reliability for high-performance applications, offering excellent thermal cycling performance at -40/150°C conditions, high shear strength, and low solder joint cracking. Additionally, the alloy provides pinhole elimination, which improves joint appearance. Indalloy®292 offers outstanding printability, stability, and enhanced SIR performance when paired with Indium8.9HF Solder Paste.
For more information about Indium Corporation’s proven products for automotive applications, visit its booth at Hall 5, Booth 310 or visit www.indium.com/products/solders/solder-paste/.
About Indium Corporation
Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, India, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.
For more information about Indium Corporation, visit www.indium.com or email jhuang@indium.com. You can also follow our experts, From One Engineer To Another® (#FOETA), at www.facebook.com/indium or @IndiumCorp.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.