-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueShowing Some Constraint
A strong design constraint strategy carefully balances a wide range of electrical and manufacturing trade-offs. This month, we explore the key requirements, common challenges, and best practices behind building an effective constraint strategy.
All About That Route
Most designers favor manual routing, but today's interactive autorouters may be changing designers' minds by allowing users more direct control. In this issue, our expert contributors discuss a variety of manual and autorouting strategies.
Creating the Ideal Data Package
Why is it so difficult to create the ideal data package? Many of these simple errors can be alleviated by paying attention to detail—and knowing what issues to look out for. So, this month, our experts weigh in on the best practices for creating the ideal design data package for your design.
- Articles
- Columns
- Links
- Media kit
||| MENU - design007 Magazine
IPC Chief Economist Dr. Shawn DuBravac Shares Industry's Financial Outlook
March 23, 2020 | I-Connect007Estimated reading time: 15 minutes
So whether we’re looking at the overall economy or even anything else—consumer spending, you name it, unemployment, and all of those will get materially worse in the second quarter. And then as we start to return to normal as businesses reopen, as we presumably have some response to this or at least, if you will, we’ve addressed the initial cause of the decline being the virus here, then you’ll start to see businesses come back, you’ll start to see consumers come back. They won’t necessarily come back to the same levels of output and consumption that they were prior to that. But because they’re coming back and because we’re measuring growth, you’ll start to see some of that recovery begin in the fourth quarter. So it depends on how you’re looking at it. Yes, we see, at least for right now, a relatively short recessionary period that will last probably from about now until the end of the third quarter or so. And then you start to see the economic recovery. But it will take some time before we return to the levels of production that we were enjoying prior to the onset of this recession.
Matties: So when you look at the current situation, what do you feel the most immediate or critical financial concern we should have in our industry?
DuBravac: Well, one of the things that we are seeing now, which is a good sign, is that the Federal Reserve is implementing a number of tools. Obviously, they cut their target interest rates early as this started to materialize into much more than just a supply shock. But they also dusted off their toolkit from the 2007 and 2009 period, and they begin to look at everything that they used then and what they could use now. And they were quick to implement some of those tools. Even this morning, the tools were expanded that they had in place. Some of these, we did not see until the eighth or ninth month of the financial crisis in 2007, 2008. Some of these were not implemented until late in 2008. And so I do see a quick response. We’re using the tools that worked well during that period.
I think those are all very good signs that remove some of the uncertainty, that we’ve seen the Fed respond very quickly, using tools that have worked in our recent past in the last recession, so that’s a good sign. What I am monitoring closely and what I talk to companies about frequently is how their lines of credit are looking. Because if you think about the lines of credit that businesses are using, often they might finance a warehouse or other equipment on any real estate, typically office buildings and in factories, warehouses tend to be financed on five-year balloons.
Every five years, they have to either refinance that loan or pay it off, and often they’re just refinancing it with the current issuer of that loan, be it a bank or someone else. What we saw during the financial crisis was that even a company that was doing well, operating fine, they were still selling product, they were able to make their payments, those loans were being called in. So when they were due at five years, they weren’t being extended. And that left businesses running to find alternative lending sources or being forced in some cases to sell this asset, sell warehouses, sell facilities. And so we watched those types of things very closely because even a company that is operating well and operating fine in this type of difficult environment could run into trouble if they have difficulties on the financing side of it.
Now a lot of what the Fed has implemented is to help address some of those things. And we haven’t heard from any companies yet that are facing these types of challenges, but I definitely am always asking about these types of things and always on the lookout for companies that might be facing any type of financial hardships as a result of this. Somebody should be checking with their bank; they should be ensuring that they have good lines of credit, that those lines of credit are secure, that they’ll be able to tap those if needed, that they’ll essentially have the liquidity that they’ll need should they run into financial constraints that are out of their control. Thus far, it looks like a lot of the manufacturers continue to operate “as normal.” And I say “as normal” in quotes.
Obviously, this is a very strong shock that we’ve seen. And from the beginning, electronics manufacturers and suppliers were impacted by this because they were having to adjust everything as new information was coming out. But at least as of last week, we were hearing from companies that they continue to operate at close to full capacity. In some instances, if they’re within the medical supply chain, they’re seeing new orders come in. Other companies report that they are ramping up production and also inventory builds just in case they run into any operating constraints or issues. For example, warehouses closing down or other things like that.
Transportation is becoming more difficult. They want to be able to turn to additional inventory that they may have on stock to be able to provides and service the sales that they have coming in.So the electronics manufacturing sector, at least for right now, seems to be intact, seems to be operating at close to full capacity here in North America. And what we’re hearing from Asia is that things have quickly come back online and by the end of the month they’ll be at or very near full capacity as well.
Matties: And if that’s any indication what’s happening in Asia, it’s kind of a model timeline for us to consider here in North America and other parts of the world.
DuBravac: I think that’s fair. I think it looks like North America and Europe, to some extent, are four to six weeks behind Asia, with respect to closures and other impacts from the spread of this virus. And so I would expect that Europe and North America would follow that similar timeline. And again, it’s never perfect. There are lots of dynamic situations that are continuing to develop and will develop over those six weeks. For example, in February, about 8% of container shipment capacity was underutilized essentially, was offline. That’s all coming back online this month and making the major container shipping companies anticipate being at full capacity in March, by the end of March. But that period in February where they weren’t at full capacity creates issues. You have the buildup of empty container cargo containers that end up building up outside of the port, or they’re left on train cars and on side rails and other things like that.Page 2 of 3
Suggested Items
Copper Price Surge Raises Alarms for Electronics
07/15/2025 | Global Electronics Association Advocacy and Government Relations TeamThe copper market is experiencing major turbulence in the wake of U.S. President Donald Trump’s announcement of a 50% tariff on imported copper effective Aug. 1. Recent news reports, including from the New York Times, sent U.S. copper futures soaring to record highs, climbing nearly 13% in a single day as manufacturers braced for supply shocks and surging costs.
Delta Electronics Thailand Ranked Among Asia’s Top Corporates at the Alpha Southeast Asia 15th Institutional Investor Awards
07/14/2025 | Delta ElectronicsDelta Electronics (Thailand) Public Company Limited, a global leader in power management and smart green solutions, has been recognized by global investors for its excellence in investor relations and corporate governance, earning top ranking in the “Most Improved Investor Relations” at the Alpha Southeast Asia 15th Annual Institutional Investor Awards for Corporates, held on June 30, 2025, in Singapore.
Kimball Electronics' Pride Month Celebrations
07/14/2025 | Kimball ElectronicsAt Kimball Electronics, we believe in fostering a culture of inclusion, respect, and belonging. This June, our global teams came together to celebrate PRIDE Month with meaningful actions that reflect our commitment to the LGBTQ+ community.
NOTE Posts Interim Report for Q2 2025
07/14/2025 | NOTENOTE reports stable second-quarter results for 2025 with continued profitability and strong cash flow, reaffirming its growth strategy despite a challenging market environment.
Scanfil, MB Elettronica to Join Forces
07/14/2025 | ScanfilFinnish Scanfil, the largest European stock exchange listed Electronic Manufacturing Service company in terms of turnover, and Italian MB Elettronica (“MB”) from Cortona Arezzo have agreed to join forces.