MacDermid Alpha Releases Single Step Copper Through-hole Filling Process for Advanced PCBs

Estimated reading time: 2 minutes

MacDermid Alpha Electronics Solutions, a global leader in specialty materials for electronics, announces the release of MacuSpec THF 100, a single step copper through-hole filling process that enables improved thermal and structural designs for IC substrates. MacuSpec THF 100 is a copper electroplating process that plates a solid copper filled through hole in core PCB layers. The copper structure provided by the process has higher thermal conductivity than paste without the thermal expansion commonly encountered with other materials. The process can fill through-holes in a fraction of the time that would be required by direct current plating. A combination of high-performance chemistry and equipment allow the system to fill holes with minimal dimple and little to no need for surface planarization, simplifying the buildup of subsequent layers.

With technology advancement comes challenges for advanced PCB fabrication. Higher processing power, more integrated circuit packages per device, and ever-increasing miniaturization has driven designers to seek new ways to improve structural integrity and thermal management in their products. MacuSpec THF 100 provides an attractive solution to these problems, allowing through-holes in a variety of substrates to be filled with void-free copper structures that have excellent physical properties and performance under the thermal stresses of assembly and device operation. When compared to alternative two-step processes that introduce an additional copper interface, the single electroplating step of the MacuSpec THF 100 creates a continuous copper structure inside the hole from top to bottom. In total, this process provides a new tool to the electronics industry for increasing circuit density and device functionality.

“With MacuSpec THF 100, we are delivering a new way to meet the design challenges required by todays highest technology consumer devices. We are incredibly excited to offer our customers a through-hole filling process that is far superior to paste filling, DC copper plating, and two-step through hole filling systems.” said Rich Bellemare, Director of Electrolytic Metallization, Circuitry Solutions.

For more information on MacuSpec THF 100, please visit MacDermidAlpha.com

 About MacDermid Alpha Electronics Solutions

Through the innovation of specialty chemicals and materials under our Alpha, Compugraphics, Kester, and MacDermid Enthone brands, MacDermid Alpha Electronics Solutions provides solutions that power electronics interconnection. We serve all global regions and every step of device manufacturing within each segment of the electronics supply chain. The experts in our Semiconductor Solutions, Circuitry Solutions, and Assembly Solutions divisions collaborate in design, implementation, and technical service to ensure success for our partner clients. Our solutions enable our customers’ manufacture of extraordinary electronic devices at high productivity and reduced cycle time. Find out more at MacDermidAlpha.com.