Standard of Excellence: Delivering Excellence—A Daily Goal
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
The Knowledge Base: Building the Workforce of Tomorrow With EMAC
IPTE Introduces EasyRouter Plug & Play
May 12, 2020 | IPTEEstimated reading time: 1 minute
IPTE, one of the world’s leading suppliers of automated production equipment for the electronics and mechanics industry, adds a new version to the range of the proven standalone offline depaneling system EasyRouter.
The new stand-alone IPTE EasyRouter Plug & Play is equipped with all the features of the IPTE EasyRouter family and is installed in no time. The IPTE EasyRouter Plug & Play comes with all the necessary tools and connections: cables, hoses, instruction video and a 10-step setup guide. After the simple plug & play installation the machine is ready to start working. There is no need to wait for the IPTE installation engineer. However, if needed, the IPTE service-hotline is always available to help and give assistance.
The IPTE EasyRouter is an effective depaneling system for offline use. The machine is equipped with a productive milling tool featuring a speed of up to 60 mm/s for the fast top routing of circuit boards. Electrical fixture ID, detection of correct position of product before placement on milling fixture pins and automatic bit clamping/unclamping are optional. Furthermore, the EasyRouter can be equipped with an acquisition system for production and operation data, in order to record the depaneling procedures.
The loading and unloading of the router is done manually during the separating process via a rotating table on which non-complex and highly functional work-piece holders are mounted. A Cobot can be integrated in the loading/unloading process as well. The X and Y drive mechanisms, for the milling operation during the separating process, are equipped with modern, fast and precise linear-motor axes. For the easy programming of the depaneling process, the programming can be carried out by using standard dxf-files or with G-data codes. Other features are the storage of the exact bit position in the TS1 software with the help of a camera, and the continuous monitoring of ESD value from the milling bit in operation.
IPTE offers a full range of depaneling systems to comply with all application requirements in board assembly operations. Regardless of the product mix, the quantities to be manufactured and the automation level on the shop floor, every customer will find an efficient machine solution for a respective task. And not to be forgotten: the IPTE depaneling solutions can be adapted to specific customer requirements with numerous options.
Share on:
Suggested Items
Specially Developed for Laser Plastic Welding from LPKF
06/25/2025 | LPKFLPKF introduces TherMoPro, a thermographic analysis system specifically developed for laser plastic welding that transforms thermal data into concrete actionable insights. Through automated capture, evaluation, and interpretation of surface temperature patterns immediately after welding, the system provides unprecedented process transparency that correlates with product joining quality and long-term product stability.
United Electronics Corporation Advances Manufacturing Capabilities with Schmoll MDI-ST Imaging Equipment
06/24/2025 | United Electronics CorporationUnited Electronics Corporation has successfully installed the advanced Schmoll MDI-ST (XL) imaging equipment at their advanced printed circuit board facility. This significant technology investment represents a continued commitment to delivering superior products and maintaining their position as an industry leader in precision PCB manufacturing.
IBM, RIKEN Unveil First IBM Quantum System Two Outside of the U.S.
06/24/2025 | IBMIBM and RIKEN, a national research laboratory in Japan, today unveiled the first IBM Quantum System Two ever to be deployed outside of the United States and beyond an IBM Quantum Data Center.
Excellon Installs COBRA Hybrid Laser at Innovative Circuits
06/23/2025 | ExcellonExcellon is pleased to announce the successful installation of a second COBRA Hybrid Laser System at Innovative Circuits, located in Alpharetta, Georgia. The Excellon COBRA Hybrid Laser System uniquely combines both UV and CO₂ (IR) laser sources on a single platform—making it ideal for high-density prototype and production printed circuit boards (PCBs).
Smart Automation: The Power of Data Integration in Electronics Manufacturing
06/24/2025 | Josh Casper -- Column: Smart AutomationAs EMS companies adopt automation, machine data collection and integration are among the biggest challenges. It’s now commonplace for equipment to collect and output vast amounts of data, sometimes more than a manufacturer knows what to do with. While many OEM equipment vendors offer full-line solutions, most EMS companies still take a vendor-agnostic approach, selecting the equipment companies that best serve their needs rather than a single-vendor solution.