Learning with Leo: Drones—Meeting Demand Without Compromise
Nolan’s Notes: Our Spotlight on North America
Global Sourcing Spotlight: Building a Supply Chain That Bends, Not Breaks
Titan Circuits Chooses Nordson SELECT Selective Soldering Equipment
July 22, 2020 | Nordson SELECTEstimated reading time: 1 minute
Nordson SELECT, a Nordson company, is pleased to announce that Titan Circuits has purchased and installed a Cerno® 103IL selective soldering system in its Phoenix, Arizona facility.
Frank Insana, Production Manager of Titan Circuits commented, “After reviewing other systems on the market it was an easy decision to make. The combination of overall capability and the dual solder nozzles soon made the Cerno® 103IL system the solution we were looking for. This system allows us to phase out of wave soldering and provides us with the ability to be more agile and flexible by running dual solder alloys for mission critical through-hole customer applications.”
“We are pleased to advance our relationship with Titan Circuits,” stated Kevin Valentine, the Americas Sales and Service Manager for Nordson SELECT. “The Cerno® 103IL delivers an exceptional combination of versatility, productivity and value with our ease-of-use programming and editing software and will serve Titan Circuits well in their growing marketplace.”
Share on:
Testimonial
"Your magazines are a great platform for people to exchange knowledge. Thank you for the work that you do."
Simon Khesin - Schmoll MaschinenSuggested Items
AQUANOX A4727 and A4625 Lead KYZEN Offerings at SMTA Oregon Expo and Tech Forum
05/06/2026 | KYZENKYZEN, the global leader in innovative environmentally responsible cleaning chemistries, will exhibit at the SMTA Oregon Expo and Tech Forum scheduled to take place Thursday, May 19 at the Wingspan Event and Conference Center in Hillsboro, Oregon.
Connect the Dots: Designing for the Future of Manufacturing Reality—Surface Finish
05/07/2026 | Matt Stevenson -- Column: Connect the DotsWhen designing the complex boards that many electronic devices require to operate, designers should consider manufacturability at every step. This is my last article focused on designing for the always-evolving manufacturing reality. Choosing the right surface finish has always been important. If you are creating intricate designs with a wide variety of components, like for an ultra-high density interconnect (UHDI) board, surface finish is a critical last step.
Indium to Showcase High-Performance AI Application Solutions at SEMICON SEA 2026
05/01/2026 | Indium CorporationAs a leading provider of advanced materials solutions for today’s demanding AI applications, Indium Corporation® will feature its high-reliability product portfolio at SEMICON SEA 2026, May 5-7, in Kuala Lumpur, Malaysia.
ACCM Unveils Negative and Near-zero CTE Materials for Large-Format AI Chips
04/21/2026 | Advanced Chip and Circuit MaterialsAdvanced Chip and Circuit Materials, Inc. (ACCM) has launched two new materials: Celeritas HM50, with a negative coefficient of thermal expansion (CTE) of -8 ppm/°C to offset the positive CTE and expansion of copper with temperature on circuit boards, and Celeritas HM001, with near-zero CTE and the low-loss performance needed for high-speed signal layers to 224 Gb/s and faster in artificial intelligence (AI) circuits.
SMTA Ultra HDI Symposium, Day 2: Fragile Supply Chains, Fierce Innovation
04/14/2026 | Marcy LaRont, I-Connect007The Arizona weather yielded another beautiful day as we gathered for the second day of SMTA’s annual UHDI symposium. After the first full day discussing the role of AI in business and the how-tos of implementation, Avondale Mayor Mike Pineda kicked off day two, proud to showcase his city and to declare its important place in the continued development of the West Valley, an increasingly important area for tech and manufacturing.