The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Indium Corporation Offers Free Presentation at SMTAI
September 17, 2020 | Indium CorporationEstimated reading time: 1 minute
Indium Corporation is offering a free presentation for students and young professionals to expand their industry knowledge of reflow basics during the virtual exposition at SMTA International from Sept. 28-30.
Kim Flanagan, Technical Support Engineer II, will present Reflow 101 from a Solder Manufacturer’s Perspective as part of SMTA’s Jump Start program. Understanding the reflow process in a soldering application is critical to producing high-quality solder joints. There are many characteristics to be considered when optimizing the solder reflow process in SMT assembly applications. In this presentation, Flanagan will start with the basics of the reflow process, how the solder paste behaves during reflow, and general reflow profiling best practices. She will then discuss some common solder defects and how to troubleshoot and remedy them from a reflow perspective.
The Jump Start Program: Industry Basics to Grow in Your Career will be available to stream in the virtual SMTA booth.
Flanagan provides technical support and guidance on process steps, equipment, techniques, and materials to customers. In addition, she provides technical training to staff and industry partners. Flanagan began her career with Indium Corporation through the company’s summer college internship program, working in the Quality Department. She remained with Indium Corporation as a part-time Quality Engineering Technician while she finished her bachelor’s degree in physics at Le Moyne College in Syracuse. She joined the technical support team in January 2017.
Indium Corporation is a premier materials refiner, smelter, manufacturer, and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include
solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, India, Malaysia, Singapore, South Korea, the United Kingdom, and the USA. For more information about Indium Corporation, visit www.indium.com or email jhuang@indium.com.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.