-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueWhat's Your Sweet Spot?
Are you in a niche that’s growing or shrinking? Is it time to reassess and refocus? We spotlight companies thriving by redefining or reinforcing their niche. What are their insights?
Moving Forward With Confidence
In this issue, we focus on sales and quoting, workforce training, new IPC leadership in the U.S. and Canada, the effects of tariffs, CFX standards, and much more—all designed to provide perspective as you move through the cloud bank of today's shifting economic market.
Intelligent Test and Inspection
Are you ready to explore the cutting-edge advancements shaping the electronics manufacturing industry? The May 2025 issue of SMT007 Magazine is packed with insights, innovations, and expert perspectives that you won’t want to miss.
- Articles
- Columns
- Links
- Media kit
||| MENU - smt007 Magazine
IPC Releases IPC-6012EM, Medical Applications Addendum to IPC-6012E
October 1, 2020 | IPCEstimated reading time: 2 minutes
IPC is known for developing addendums to some of its most widely used standards for specific industry sector use, including military/aerospace, space flight, automotive and telecommunications. Now, IPC has responded to requests from the medical device segment of the electronics industry and has released IPC-6012EM, Medical Applications Addendum to IPC-6012E, Qualification and Performance Specification for Rigid Printed Boards.
The IPC D-33AM Task Group developing IPC-6012EM realized that there are two different focuses for electronics in the medical device industry sector: the relatively high-volume production of “standard-sized” printed boards for medical diagnostic equipment applications; and the miniature, high density printed boards for very small devices which are often human body implantable.
“We understand the medical industry utilizes electronics in laser surgical devices, radiation emitting devices, x-ray machines, ultrasound devices and implantables where product failure can result in the high risk of injury to the patient,” noted John Perry, IPC director of printed board standards and technology. “IPC recognized the industry’s desire for more stringent printed board fabrication requirements than can be provided within the current IPC Class 3 Performance class for these types of medical devices. The IPC D-33AM Task Group was created to develop an addendum to the base IPC-6012E printed board performance specification that addresses those technological needs.”
IPC’s family of printed board design standards (IPC-2220 series) and board performance specifications IPC-6010 series) make use of three IPC producibility levels, intended to convey to the end user an increasing cost and sophistication with respect to fabricating printed board features of smaller and smaller size. IPC-6012EM is the first addendum to an IPC specification that makes use of a new design level “D”, which was created to address the miniaturization level of medical devices. This new design level “D” goes beyond the typical feature sizes of what is typically considered “high density interconnect” (HDI) and addresses conductor width/spaces below 60 µm as well as via structures below 100 µm.
Many regulatory requirements provided by both the United States Food and Drug Administration (FDA) and the European Union (EU), help ensure the safety and security of human beings (and animals) with respect to not only human and veterinary drugs and biological products, but also electronic medical devices. Examples include the EU Medical Device Directive, EU Active Implantable Medical Devices Directive and the EU Commission Regulations. As noted by Andres Ojalill, IPC technical staff liaison to the IPC D-33AM Task Group, “IPC-6012EM has been written to streamline the production of high reliability printed boards for medical devices in accordance with regulations mentioned above so that there are no gaps between technical and regulatory requirements.”
For more information on IPC-6012EM, visit ipc.org.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
06/27/2025 | Nolan Johnson, I-Connect007While news outside our industry keeps our attention occupied, the big news inside the industry is the rechristening of IPC as the Global Electronics Association. My must-reads begins with Marcy LaRont’s exclusive and informative interview with Dr. John Mitchell, president and CEO of the Global Electronics Association. For designers, have we finally reached the point in time where autorouters will fulfill their potential?
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.
RTX, the Singapore Economic Development Board Sign MOU Outlining 10-year Growth Roadmap
06/20/2025 | RTXRTX and the Singapore Economic Development Board (EDB) have signed a Memorandum of Understanding (MoU) which outlines a 10-year roadmap to further long-term strategic collaboration in Singapore.
Indra Signs Agreement with AXISCADES to Boost Production of Cutting-Edge Systems in India
06/18/2025 | PRNewswireParis Air Show -- Indra and the Indian technology company AXISCADES have signed an agreement to collaborate on the production of solutions for the aerospace and defense markets.
GKN Aerospace Delivers First High Voltage EWIS System for Clean Aviation’s SWITCH Project
06/16/2025 | GKN AerospaceGKN Aerospace has completed and delivered the first high voltage Electrical Wiring Interconnection System (EWIS) for the Clean Aviation SWITCH project.