Standard of Excellence: Delivering Excellence—A Daily Goal
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
The Knowledge Base: Building the Workforce of Tomorrow With EMAC
Delft Hyperloop Details Eurocircuit Role in PCB Production, Assembly
November 5, 2020 | EurocircuitsEstimated reading time: 1 minute
Every implementation of the Hyperloop system will contain a lot of electronics. Our prototype pod uses 8 electric motors and motor controllers to propel itself. These motors are powered by 2 LiPo battery packs. To connect all of the electrical systems of the vehicle we also need a control PCB including an embedded microcontroller that interfaces with these systems using a CAN interface. Furthermore, this PCB is also used to activate the brakes, readout the position and velocity of the vehicle, send data to an external PC using an Ethernet interface and log on-board data to an SD card. Throughout the year we have ordered a lot of different PCBs that are essential for the functioning of our pod. Eurocircuits facilitated our PCB production and assembly throughout the year.
Using the knowledge of the previous Delft Hyperloop years we could immediately start on our V1, which we decided to assemble ourselves to stay flexible and have even shorter lead times.
This PCB was tested and used long before our pod was produced. By performing integrated tests with our powertrain and propulsion departments, it was possible to find points of improvement early on in the year.
This resulted in PCB V2, which was installed on last year’s pod. With this vehicle, we were able to test our complete electrical design and achieve some rather high speeds at our test track.
After having tested with two prototype PCB versions, we used the Eurocircuits assembly service for V3. This gave us time to continue testing with our older versions and resulted in a highly accurate PCB to be used for our record attempt.
In a year with tight deadlines and many design iterations our collaboration with Eurocircuits was essential to getting a proper functioning electrical system. Because of the short lead times and the variety of different options offered at Eurocircuits, we were able to keep focussing on our designs and always have working PCBs on time for important tests. Especially the Eurocircuits PCB checker has been very useful as it has detected some design errors in our PCB which could be fixed before we ordered the PCB.
Share on:
Suggested Items
DownStream Acquisition Fits Siemens’ ‘Left-Shift’ Model
06/26/2025 | Andy Shaughnessy, I-Connect007I recently spoke to DownStream Technologies founder Joe Clark about the company’s acquisition by Siemens. We were later joined by A.J. Incorvaia, Siemens’ senior VP of electronic board systems. Joe discussed how he, Rick Almeida, and Ken Tepper launched the company in the months after 9/11 and how the acquisition came about. A.J. provides some background on the acquisition and explains why the companies’ tools are complementary.
Elementary Mr. Watson: Retro Routers vs. Modern Boards—The Silent Struggle on Your Screen
06/26/2025 | John Watson -- Column: Elementary, Mr. WatsonThere's a story about a young woman preparing a holiday ham. Before putting it in the pan, she cuts off the ends. When asked why, she shrugs and says, "That's how my mom always did it." She asks her mother, who gives the same answer. Eventually, the question reaches Grandma, who laughs and says, "Oh, I only cut the ends off because my pan was too small." This story is a powerful analogy for how many PCB designers approach routing today.
Siemens Turbocharges Semiconductor and PCB Design Portfolio with Generative and Agentic AI
06/24/2025 | SiemensAt the 2025 Design Automation Conference, Siemens Digital Industries Software today unveiled its AI-enhanced toolset for the EDA design flow.
Cadence AI Autorouter May Transform the Landscape
06/19/2025 | Andy Shaughnessy, Design007 MagazinePatrick Davis, product management director with Cadence Design Systems, discusses advancements in autorouting technology, including AI. He emphasizes a holistic approach that enhances placement and power distribution before routing. He points out that younger engineers seem more likely to embrace autorouting, while the veteran designers are still wary of giving up too much control. Will AI help autorouters finally gain industry-wide acceptance?
Beyond Design: The Metamorphosis of the PCB Router
06/18/2025 | Barry Olney -- Column: Beyond DesignThe traditional PCB design process is often time-consuming and labor-intensive. Routing a complex PCB layout can consume up to 30% of a designer’s time, and addressing this issue is not straightforward. We have all encountered this scenario: You spend hours setting the constraints and finally hit the Go button, only to be surprised by the lack of visual appeal and the obvious flaws in the result.