Standard of Excellence: Speed vs. Quality in Customer Service
Knocking Down the Bone Pile: Revamp Your Components with BGA Reballing
Global Sourcing Spotlight: Balancing Speed and Flexibility Without Sacrificing Control
Virtual Industries Offers Versatile STEALTH-VAC ELITE Vacuum Pen
February 12, 2021 | Virtual Industries Inc.Estimated reading time: 1 minute
Virtual Industries Inc., a leading supplier of manual vacuum handling solutions, offers the STEALTH-VAC™ ELITE ESD-SAFE Kit – Normally Closed VACUUM PEN™ (Order #VVSV-NC-KIT). The system operates on compressed air or nitrogen.
The STEALTH-VAC™ ELITE operates directly on 30 to 50 psi filtered compressed air or nitrogen. The normally closed STEALTH-VAC™ ELITE VACUUM PEN™ contains a whisper quiet venturi vacuum generator that is activated only when the control button is depressed. This helps conserve factory compressed air when the tool is not in use.
The vacuum level can be controlled by adjusting the input pressure. At 10 psi input the vacuum level is 2 InHg with 1 lpm of free air flow, at 30 psi input the vacuum level is 10 InHg with 3 lpm of free air flow, and at 70 psi input the vacuum level is 20 InHg with 4 lpm of free air flow.
The STEALTH-VAC ELITE comes with five bent probes mounted with Non-marking Buna-N Static Dissipative Non-Marking Vacuum Cup sizes 3/32” (2.38mm), 1/8” (3.18mm), 3/16” (4.76mm), 1/4” (6.35mm), and 3/8” (9.53mm), as well as four straight probes mounted with Non-marking Buna-N Static Dissipative Non-Marking Vacuum Cup sizes 1/8” (3.18mm), 1/4” (6.35mm), 3/8” (9.53mm) and 1/2” (12.70mm). Also included is the vacuum hose with an adaptor and a stand to rest the handle in when not in use.
Share on:
Testimonial
"We’re proud to call I-Connect007 a trusted partner. Their innovative approach and industry insight made our podcast collaboration a success by connecting us with the right audience and delivering real results."
Julia McCaffrey - NCAB GroupSuggested Items
Amplifying Innovation: New Podcast Series Spotlights Electronics Industry Leaders
10/08/2025 | I-Connect007In the debut episode, “Building Reliability: KOKI’s Approach to Solder Joint Challenges,” host Marcy LaRont speaks with Shantanu Joshi, Head of Customer Solutions and Operational Excellence at KOKI Solder America. They explore how advanced materials, such as crack-free fluxes and zero-flux-residue solder pastes, are addressing issues like voiding, heat dissipation, and solder joint reliability in demanding applications, where failure can result in costly repairs or even catastrophic loss.
Aismalibar North America Showcases Advanced Thermal Management Solutions at The Battery Show North America 2025
09/18/2025 | AismalibarAismalibar North America, a leader in high-performance thermal management solutions, will present its latest innovations at The Battery Show North America and Electric & Hybrid Vehicle Technology Expo 2025 in Detroit, Michigan, October 6–9, 2025, where attendees can meet the team at Booth #5929 to explore materials engineered for demanding EV and high-power electronics.
IPS, SEL Raise the Bar for ENIG Automation in North America
09/11/2025 | Mike Brask, IPSIPS has installed a state-of-the-art automated ENIG plating line at Schweitzer Engineering Laboratories’ PCB facility in Moscow, Idaho. The 81-foot, fully enclosed line sets a new standard for automation, safety, and efficiency in North American PCB manufacturing and represents one of the largest fully enclosed final finish lines in operation.
Indium Corporation to Highlight High-Reliability Solder Solutions at SMTA Guadalajara Expo
09/04/2025 | Indium CorporationIndium Corporation, a leading materials refiner, smelter, manufacturer, and supplier to the global electronics, semiconductor, thin-film, and thermal management markets, will feature a range of innovative, high-reliability solder products for printed circuit board assembly (PCBA) at the SMTA Guadalajara Expo and Tech Forum, to be held September 17-18 in Guadalajara, Mexico.
New Podcast Episode Drop: MKS’ Atotech’s Role in Optimize the Interconnect
09/08/2025 | I-Connect007In this episode of On the Line With…, host Nolan Johnson sits down with Patrick Brooks, MKS' Atotech's Global Product Director, EL Systems, to discuss the critical role that wet processes play alongside laser systems in advancing the Optimize the InterconnectSM initiative. Brooks points to Bondfilm as a key example—a specialized coating that enables CO₂ lasers to ablate more effectively than ever before.