The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
1 Click SMT Launches High Flexibility, High Production Selective Soldering Machine in North America
February 26, 2021 | 1 Click SMTEstimated reading time: 1 minute
1 Click SMT Technology Co., ltd is pleased to offer the MAS-i2 inline selective soldering machine to the North American market after 50+ successful installations in Asia.
The MAS-i2 has a three-section conveyor system: fluxing, preheating and soldering. While one board is soldering, another is preheating and a third board is fluxing, saving time and enhancing production.
The MAS-i2 can equip two fluxer valves, either two of the same valve or two different valves. For example, two drop jet valves enable customers to double production, or one drop jet valve and one micro-spray valve enable the use of two different fluxes simultaneously.
The preheating zone features hot air convection at the top and IR preheating at the bottom, ensuring that PCBs get enough preheating before soldering. Meanwhile, the soldering section has top IR preheating to maintain the board’s temperature during the soldering process.
For soldering, the system is equipped with two individual solder pots in two individual Z-axis. The soldering area can accommodate PCBs up to 450 W x 508 mm L (18 x 20") for two nozzles individually, or 235 W x 508 mm L (9.25 x 20") for two parallel nozzles. As a result, customers can program the system to use only one solder pump, two simultaneously to double the speed, or one solder pump with a larger nozzle first and then another solder pump with a smaller nozzle.
This is a huge benefit if a customer uses two types of flux and two different types of solder for their customers – they don't need to waste time on changing the flux in the tank, cleaning the flux nozzle, changing the flux valve, changing the solder pot, waiting for the solder to melt, calibrating solder pot position, etc.
1 Click SMT is a machine manufacturing and distribution company. The company provides customers worldwide with a one-stop SMT solution using China’s 30 years of electrical industry experience to provide quality products at a competitive price.
1 Click SMT manufactures selective soldering, wave soldering and PCB handling equipment under the Sasinno brand. The brand stands for “Smart and Steady Innovation.” For other equipment, such as AOI, reflow ovens, conformal coating, dispensing, printers, SPI, odd insertion, etc., 1 Click SMT has an experienced engineering team to source and qualify these machines.
1 Click SMT has established a strong worldwide distribution channel. The company has well-trained engineers to support its customers in any location.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.