Global Citizenship: Together for a Perfect PCB Solution
Smart Automation: Odd-form Assembly—Dedicated Insertion Equipment Matters
Nolan’s Notes: Everyone Has Their Eye on India
I-Connect007 Video: A Salute to The Industry
March 22, 2021 | Real Time with...IPCEstimated reading time: 1 minute
I-Connect007 has produced this new one-minute video to acknowledge nearly 35 years of sharing your stories. In 1987 we launched our first industry publication and we have been dedicated to covering this industry ever since.
We did not start out as publishers: in fact, our background was in printed circuit board fabrication. In 1987 there were still nearly 3,000 PCB shops in North America. At the time, profits were goods, trade events included giant industry parties (remember the extravagant hospitality suites in Anaheim?), and the industry was in a state of change.
New environmental regulations were impacting the industry and beginning to change the business of running PCB shops. We saw a real need to start a magazine that really focused on navigating and improving the business of running PCB shop. Now, there are only about 300 PCB fabricators in North America, profit margins are much lower, and running a PCB facility is more challenging than ever.
Our time spent in PCB fabrication inspired us to start the magazine. Well, that and the introduction of the Apple Macintosh. The Macintosh, which offered 128 KB of RAM, a nine-inch monochrome display (512 × 342), and no internal hard drive, enabled us to pioneer desktop publishing. It was an amazing time.
Since that time, we’ve published hundreds of magazine issues, toured countless numbers of facilities all around the world, interviewed so many amazing people, and shot upward of 100,000 photos. From all of this, we’ve learned that in this industry, the whole is truly greater that the sum of its parts.
With this video, we salute the wonderful people in this vital industry who we’ve had the pleasure of working with for almost 35 years.
Share on:
Testimonial
"Advertising in PCB007 Magazine has been a great way to showcase our bare board testers to the right audience. The I-Connect007 team makes the process smooth and professional. We’re proud to be featured in such a trusted publication."
Klaus Koziol - atgSuggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
09/12/2025 | Marcy LaRont, I-Connect007We may be post-Labor Day, but it is still hot-hot-hot here in the great state of Arizona—much like our news cycles, which have continued to snap, crackle, and pop with eye-raising headlines over this past week. In broader global tech news this week, AI and tariff-type restrictions continues to dominate with NVIDIA raising its voice against U.S. lawmakers pushing chip restrictions, ASML investing in a Dutch AI start-up company to the tune of $1.5 billion, and the UAE joining the ranks of the U.S. and China in embracing “open source” with their technology in hopes of accelerating their AI position.
IPS, SEL Raise the Bar for ENIG Automation in North America
09/11/2025 | Mike Brask, IPSIPS has installed a state-of-the-art automated ENIG plating line at Schweitzer Engineering Laboratories’ PCB facility in Moscow, Idaho. The 81-foot, fully enclosed line sets a new standard for automation, safety, and efficiency in North American PCB manufacturing and represents one of the largest fully enclosed final finish lines in operation.
Dan Feinberg on Walt Custer: Remembering an Extraordinary Business Associate and Friend
09/09/2025 | Dan Feinberg, Technology Editor, I-Connect007The passing of Walt Custer marks the end of an era for all those who knew him and were helped and impressed by his presence, both personally and professionally. Walt's life was characterized by his unwavering commitment to the industry, his profound wisdom and willingness to share it, and his infectious enthusiasm for everything he did.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
09/05/2025 | Andy Shaughnessy, I-Connect007It’s almost fall here in Atlanta, and that means that the temperature is finally dropping. And it quit raining! It’s been raining since March, and I’m so over it, as the social influencers say. Last night we grilled out on the deck, and it wasn’t hot, and we didn’t get rained on. Life is good. It was a busy week in the industry. In this installment of my must-reads, we say goodbye to Walt Custer, the man who made PCB data points interesting for the rest of us.
UHDI Fundamentals: UHDI Technology and Industry 4.0
09/03/2025 | Anaya Vardya, American Standard CircuitsUltra high density interconnect (UHDI) technology is rapidly transforming how smart systems are designed and deployed in the context of Industry 4.0. With its capacity to support highly miniaturized, high-performance, and densely packed electronics, UHDI is a critical enabler of the smart, connected, and automated industrial future. Here, I’ll explore the synergy between UHDI and Industry 4.0 technologies, highlighting applications, benefits, and future directions.