Nolan’s Notes: Looking Deep Into the Future With X-ray
Knocking Down the Bone Pile: Basics of Component Lead Tinning
Standard of Excellence: Anticipating Customer Needs Early and Often
iNEMI Webinar to Tackle Failures and Challenges in Conformal Coating Process
June 22, 2021 | iNEMIEstimated reading time: Less than a minute
The International Electronics Manufacturing Initiative (iNEMI) will be holding a webinar focused on conformal coating on June 30, 2021. As part of iNEMI’s series of webinars on board assembly technologies, the June 30 event will discuss the most frequent failures and challenges associated with the conformal coating process along with tools that can help ensure the quality of conformal coating on an ongoing basis.
GfKORR, the Society of Corrosion Protection, is a federation of corrosion experts from industry and academia working in all fields of corrosion science with the aim of avoiding corrosion and its negative consequences. The Society has published Guidelines for the Application and Utilization of Protective Coating for Electronic Assemblies. This document, which will soon be available as an IEC PAS (Public Available Specification), has collected and analyzed significant customer process data to identify possible causes for the most frequent failures, such as cracks, blisters, and delamination.
The guest speaker for this webinar is Freddy Gilbert, Technology Analyst, ZESTRON Reliability & Surfaces. He will detail the likely causes of these failures and discuss effective preventative measures along with tools that can help ensure conformal coating quality. The webinar is open and free to the industry.
Share on:
Suggested Items
Real Time with... IPC APEX EXPO 2025: New Dispensing and Coating Solutions from Rehm
04/03/2025 | Real Time with...IPC APEX EXPOMichael Hanke, Global Sales Officer at Rehm, discusses new dispensing and coating equipment developed in Germany. He emphasizes the significance of software integration with customer systems to tackle market challenges.
Axxon-Mycronic to Showcase Advanced Coating, Dispensing, and Backend Solutions at IPC APEX EXPO 2025
02/19/2025 | Axxon-MycronicAxxon-Mycronic, a leading, global supplier of innovative and production-ready, dispensing and conformal coating systems, to announce its participation at the IPC APEX EXPO 2025, taking place March 18-20, 2025 at the Anaheim Convention Center.
Nordson Electronics Solutions Introduces ASYMTEK Select Coat SL-1040 Ultrasonic Cleaning Station for Maintaining Conformal Coating Equipment
02/13/2025 | Nordson Electronics SolutionsNordson Electronics Solutions, a global leader in reliable electronics manufacturing technologies, announces their latest technology innovation for conformal coating systems, the ASYMTEK Select Coat® SL-1040 Ultrasonic Cleaning Station (patent pending) to keep nozzles and needles clean, and prevent clogging during production
Rehm Thermal Systems Brings Pioneering Manufacturing Technologies to productronica China 2025
02/11/2025 | Rehm Thermal SystemsRehm Thermal Systems will be presenting its further developments in areas such as convection soldering under vacuum, condensation soldering, coating and dispensing in Hall E4 of the Shanghai New International Expo Centre from 26 to 28 March.
Rehm Thermal Systems: Future Technologies for Coating, Dispensing and Vapour Phase Soldering Live at IPC APEX EXPO 2025
02/04/2025 | Rehm Thermal SystemsIPC APEX EXPO 2024, which takes place from 18 to 20 March at the Anaheim Convention Center in California, is the largest and most important trade fair for electronics manufacturing in North America.