Machine Learning Provides Shortcut to Simulate Interactions in Materials for Solar Energy
August 2, 2021 | Argonne National LaboratoryEstimated reading time: 3 minutes
Scientists are using machine learning to speed up development of materials that can harness energy from sunlight.
Harnessing sunlight holds promise as a means to cleanly generate renewable energy for next-generation technologies, from solar fuel cells to water treatment systems. Such technologies require an understanding of what happens when materials and molecules absorb sunlight.
Computer simulations can help us better understand light-matter interactions. However, modeling materials featuring multiple types of structures, such as solid/water interfaces, is a complex task. But now, a research team at the U.S. Department of Energy’s (DOE) Argonne National Laboratory has found a way to simplify these modeling tasks.
“The impact of our machine learning exercise turned out to be further reaching than expected; the data-driven approach we adopted indicated to us new ways to study light-matter interaction in even more realistic and more complex systems than the one we started out studying.” — Argonne senior scientist Giulia Galli added.
Using a data-driven approach based on machine learning, the team was able to simplify the solution of the quantum mechanical equations that describe how light is absorbed by a solid, liquid or molecule. Results of the research were recently published in Chemical Sciences.
“It is certainly not intuitive at first, but it turns out that machine learning techniques can be used for purposes much different than recognizing images or predicting consumer needs,” said Marco Govoni, co-author of the study and assistant scientist in Argonne’s Materials Science division.
The trick? Recognizing that not all terms of the quantum mechanical equations need be computed in the same way. In fact, some terms could be calculated — or learned — from simpler quantities, remarkably speeding up the overall simulation.
“An important realization of our work was to understand that we could reuse information obtained for a given solid or liquid without repeating calculations for similar systems. In essence, we came up with a sort of recycling protocol to reduce the complexity of calculations required to simulate absorption of light by materials and molecules,” said Sijia Dong, who was a postdoctoral fellow at Argonne when the research was conducted and is now assistant professor at Northeastern University.
These protocols can lead to big savings when it comes to simulations that may take many hours or even days on high-performance computing architectures.
In fact, the technique the team devised allowed simulations of absorption spectra of complex systems to run between 10 and 200 times faster. These systems include solid/liquid interfaces such as those found between water and a photoelectrode (a material that can turn sunlight into electricity).
“Our study also gave insight into how to improve and modify the underlying theory used in the simulations,” said Giulia Galli, senior scientist in Argonne’s Materials Science division and deputy director for strategy at Argonne’s Advanced Materials for Energy-Water Systems (AMEWS) Center. Galli is also Liew Family Professor of Molecular Engineering and professor of chemistry at the University of Chicago and the director of the Midwest Integrated Center for Computational Materials (MICCoM) headquartered at Argonne.
“The impact of our machine learning exercise turned out to be further reaching than expected; the data-driven approach we adopted indicated to us new ways to study light-matter interaction in even more realistic and more complex systems than the one we started out studying,” Galli added.
The team is now looking at applying these shortcuts and recycling protocols to electronic structure problems not only related to light absorption, but also to light manipulation for quantum sensing applications.
Applications to silicon/water interfaces and water were funded by AMEWS, an Energy Frontier Research Center funded by DOE’s Office of Basic Energy Sciences (BES). MICCoM funded the machine learning algorithms as part of the Computational Materials Science Program, supported by BES.
Computational resources include the Argonne Leadership Computing Facility, a DOE Office of Science User Facility, and the University of Chicago’s Research Computing Center, including its GM4 cluster supported by the National Science Foundation.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Automation in North American PCB Shops
05/17/2024 | Real Time with...IPC APEX EXPOBenmayor Group has entered the North American market's automation landscape with their Technosystem division. In this interview, Eduardo Benmayor highlights this underinvestment and current efforts to catch up and address challenges related to strategic planning. Eduardo shares Technosystem's automation journey, from simple equipment to robotic arms, stressing the importance of machine communication and data analysis. He also offers advice on implementing automation in older facilities.
TactoTek Licenses IMSE Technology to Polestar for Sustainable Electronics Design Innovation
05/15/2024 | TactoTekPolestar, the Swedish electric performance car brand, and Finnish smart surface pioneer TactoTek, have entered a collaboration to explore integration of Injection Molded Structural Electronics (IMSE) technology into Polestar’s vehicle programs.
Using AI to Redefine Productivity
05/15/2024 | Nolan Johnson, SMT007 MagazinePlato Systems, a machine perception company spun out of Stanford University, employs AI and video data to analyze and optimize the human component in manufacturing. Initially focused on semiconductors, Plato Systems has expanded into EMS manufacturing. Co-founder and CEO Amin Arbabian, along with product advisor Anders Holden and head of growth Luis Vidal, discuss their approach to changeover optimization and its impact on productivity in the industry. They’ve also included customer Raj Vora in the conversation.
Real Time with… IPC APEX EXPO 2024: Saki America's Inspection Solutions and Market Expansion
05/15/2024 | Real Time with...IPC APEX EXPOCraig Brown, GM of Saki America, speaks with Editor Marcy LaRont about Saki's comprehensive inspection solutions, metrology, quality control, and software integration. He also touches on the company's recent X-ray machine award, the 3Di-LS3 machine, and their growing presence in the US and Mexico markets.
Saki Set to Highlight Cutting-Edge Inspection Technology at SMTConnect 2024
05/15/2024 | Saki CorporationSaki Corporation, an innovator in the field of automated optical and X-ray inspection equipment, will be exhibiting at SMTConnect 2024 in Nuremberg, Germany from June 11-13. As a key highlight of the Selecs booth #235 in Hall 4, Saki will be showcasing its unique range of automated inspection solutions including the award-winning X-ray Automated Inspection System (AXI) and innovative ‘One Programming’ and AI Solutions Features.