Dan’s Biz Bookshelf: ‘The Future of Sales'
Driving Innovation: Traceability in PCB Production
It’s Only Common Sense: Price—Is That All You’ve Got?
CIPSA Circuits Finds Success with Ucamco’s Ledia Direct Imager
August 4, 2021 | UcamcoEstimated reading time: Less than a minute
In January of 2021, Barcelona based CIPSA Circuits installed a Ledia direct imager from Ucamco along with an autoloader from Techno System - Benmayor. The early results are very satisfactory, much to the delight of Nuria Vidal, General Manager at CIPSA:
"Our company is specialized in the production of printed circuit boards, manufactured according to the specifications and requirements of our customers. CIPSA produces the whole range of printed circuit, from prototype to mass production. Keeping up with the latest trends and evolutions is key in our field.”
Vidal continued, “The perspective of the new Ledia, which is without a doubt the most cost-effective direct imaging solution on the market - trust me, we have done very thorough research - in combination with the new autoloader, looked highly promising and has not disappointed at all. Ever since the installation of our newest hardware, everything has been running smoothly. It is too early to name numbers, but the new products have undoubtedly boosted our productivity by a big margin.”
“The service provided by Ucamco and Benmayor has been nothing short of great. We are looking forward to continuing this great partnership in the future."
Share on:
Suggested Items
High-frequency EMC Noise in DC Circuits
05/29/2025 | Karen Burnham, EMC UnitedEMC isn’t black magic, but it’s easy to understand why it seems that way. When looking at a schematic like that in Figure 1, it looks like you’re only dealing with DC signals all across the board. There’s a 28 VDC input that goes through an EMI filter, then gets converted to 12 VDC power. Except in extremely rare circumstances involving equipment sensitive to magnetostatic fields, DC electricity will never be part of an EMC problem.
Amphenol Printed Circuits Brings Its Boards to the 2025 IMSI
05/29/2025 | Amphenol Printed CircuitsAmphenol Printed Circuits will be offering a small but impressive sample of its vast design, manufacturing, and test capabilities in Radio Frequency (RF) printed circuit boards (PCBs) Rigid-Flex/Flex and backplanes at the 2025 IEEE MTT-S International Microwave Symposium exhibition.
Canadian Circuits Inc. Unveils Rapid Prototype PCB Assembly Service to Accelerate Innovation
05/14/2025 | Canadian Circuits, Inc.Canadian Circuits Inc. (CCI), a leading provider of high-quality, made-in-Canada, Printed Circuit Board (PCB) solutions, is proud to announce the launch of its Prototype PCB Assembly (PCBA) service. This new offering enhances CCI’s commitment to empowering engineers and OEMs by accelerating the journey from concept to product launch with precision and efficiency in electronics manufacturing.
American Standard Circuits to Exhibit and Speak at SMTA Oregon Expo
05/14/2025 | American Standard CircuitsAnaya Vardya, President, and CEO of American Standard Sunstone Circuits has announced that his company will be exhibiting SMTA Oregon Expo & Tech Forum to be held on May 20 at the Wingspan Events and Conference Center in Hillsboro, Oregon.
Green Circuits Expands Large-Format PCBA Capabilities with Installation of JUKI Primo Screen Printer
05/05/2025 | Green CircuitsGreen Circuits, a full-service Electronics Manufacturing Services (EMS) partner to leading OEMs, proudly announces the installation of the JUKI Primo Large-Format Screen Printer, expanding its capabilities to support printed circuit board assemblies (PCBAs) up to 33.5" x 24".