One World, One Industry: IPC APEX EXPO 2025 Marks a Special Anniversary Year
Nolan’s Notes: Your Golden Ticket
The Knowledge Base: Challenges and Considerations of Harsh Environments
Soldering and Joint Encapsulation with One Step Reflow from SHENMAO
August 25, 2021 | SHENMAO America, Inc.Estimated reading time: Less than a minute
SHENMAO America, Inc.’s Joint Enhanced Solder Paste (JEP) PF606-EP305 offers the advantages of both conventional solder paste and anisotropic conductive paste, i.e., self-alignment and planar insulation, respectively. JEP enables soldering and joint encapsulation in one step reflow.
The new epoxy-based solder material is designed for very fine pad size (70 ?m) soldering, especially for advanced display packaging and assembly. It is compatible with various surface finishes, with a transparent residue and no cleaning required.
SHENMAO’s JEP is eco-friendly with both lead-free and halogen-free. Halogen can generate hazardous gas at high temperature and the use is restricted. SHENMAO halogen-free JEP materials meet J-STD standard (?1000ppm Chlorine/ ? 1000ppm Bromine) and IEC standard (?900ppm Chlorine/ ? 900ppm Bromine/ ? 1500ppm Total halogens).
SHENMAO has successfully been approved by many international well-known electronic manufacturers. The company strives to offer the best quality without compromising cost and time-to-market while providing maximum value to all customers. SHENMAO America, Inc. blends SMT solder paste at its facility in San Jose, CA for distribution in North America.
Share on:
Suggested Items
Indium to Showcase High-Reliability Solder Technology at IPC APEX EXPO 2025
03/05/2025 | Indium CorporationIndium Corporation®, a leading materials provider for the electronics assembly market, will feature its high-reliability solder solutions at IPC APEX EXPO 2025, taking place March 18-20 in Anaheim, California.
SolderKing Doubles Facility to Meet Growing Demand
02/18/2025 | SolderKingSolderKing, a leading UK manufacturer of soldering materials, has expanded its operations by doubling its facility. The move follows a significant rise in export sales throughout 2024 and reinforces the company’s position as a key supplier of regulatory-compliant soldering solutions across the UK and Europe.
SEHO to Highlight Cutting-Edge Soldering Technology at IPC APEX Expo 2025
02/17/2025 | SEHOSEHO, a worldwide leading manufacturer of complete solutions for soldering processes and automated production lines, is thrilled to present its best-selling selective soldering system SEHO SelectLine-C at the IPC APEX Expo 2025 in Anaheim.
Bridging the Gap: Workforce Collaboration in East Texas
02/13/2025 | Cory Blaylock, IPCIPC has partnered with Stephen F. Austin State University's (SFASU) Center for Applied Research and Rural Innovation (CARRI) and the IPC Education Foundation on a transformative project aimed at aligning academic training with real-world demands in electronics manufacturing.
Rehm Thermal Systems Brings Pioneering Manufacturing Technologies to productronica China 2025
02/11/2025 | Rehm Thermal SystemsRehm Thermal Systems will be presenting its further developments in areas such as convection soldering under vacuum, condensation soldering, coating and dispensing in Hall E4 of the Shanghai New International Expo Centre from 26 to 28 March.