Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Nolan’s Notes: Soldering Technologies
Mentor Graphics Polska Sp. z o.o Merge into Siemens Industry Software Sp. Z.o.o.
November 3, 2021 | Mentor GraphicsEstimated reading time: 1 minute
Mentor Graphics Polska Sp. z o.o plans to merge into Siemens Industry Software Sp. Z.o.o. in the first quarter of 2022.
Therefore, the companies have jointly agreed on a Terms of Merger of Companies. The agreed Terms of Merger, after their publication, will be submitted to the competent register court of each respective company.
The merger will be executed by way of merger by acquisition, according to Article 492 (1) point 1 CCC, i.e., the transfer of all assets of the acquired company by way of universal succession, to the Acquiring Company. Upon the consent of the shareholder of both merging companies the merger procedure will be simplified by withdrawal from some non-obligatory stages, including examination of the terms of merger by the expert appointed by the register court and preparation of the report justifying merger by the Boards of both companies.
Having regard to the fact that the both merging companies have the same sole shareholder, i.a. Siemens Beteiligungen Europa GmbH, the planned merger will not change the shareholders’ structure of Siemens Industry Software sp. z o.o.
Execution of the merger will require amendment of the Articles of Association and increase of the share capital of the Acquiring Company (Siemens Industry Software sp. z o.o.) by establishing additional shares for Siemens Beteiligungen Europa GmbH in exchange for the assets of Mentor Graphics Polska sp. z o.o. being merged into Siemens Industry Software sp. z o.o.
The Boards of Mentor Graphics Polska sp. z o.o. and Siemens Industry Software sp. z o.o., pursuant to Article 500 (21) of the CCC publish on their websites the agreed Terms of Merger.
Share on:
Suggested Items
Spotlight on PEDC: Filbert Arzola
12/19/2024 | Andy Shaughnessy, Design007 MagazineIPC and FED have teamed up to create a new PCB design conference in Vienna, Austria. The Pan-European Electronics Design Conference (PEDC) takes place Jan. 29-30 at the NH Danube City hotel in Vienna. Raytheon’s Filbert Arzola is presenting “Engineering and Adapting Model-based PCB Design in Step with Sustainability and Digital Twins” at PEDC. I asked Filbert to discuss what attendees can expect from his class.
Avnet Insights: Engineers Outline Opportunity for AI
12/19/2024 | AvnetFor the fourth consecutive year, Avnet, Inc. (Nasdaq: AVT) will release its Avnet Insights survey, which has been keeping a pulse on how engineers are responding to the market since 2021. This year’s survey examines technology’s new frontier: Artificial Intelligence, and the promise – and challenges – it presents for product design.
IPC/WHMA Launches Groundbreaking Online Course on Wire Harness Design
12/18/2024 | IPCIPC/WHMA is excited to announce the launch of its new online instructor-led training course, "Introduction to Wire Harness Design I," available now through the IPC EDGE Learning Management System.
The Companion Guide to 'Designing for Reality' by Matt Stevenson Now Available
12/19/2024 | I-Connect007I-Connect007 is excited to announce the release of "The Companion Guide to...Designing for Reality," written by Matt Stevenson of ASC Sunstone Circuits. This essential resource builds on the foundational insights presented in "The Printed Circuit Designer’s Guide to... Designing for Reality" and delivers advanced strategies for scaling PCB production.
Global PCB Connections: Following DFM Rules Leads to Better Boards
12/18/2024 | Jerome Larez -- Column: Global PCB ConnectionsAs a PCB field applications engineer, ensuring smooth communication between PCB designers and fabricators is one of my frequent challenges. A critical part of that dialogue is design for manufacturing (DFM). Many designers, even experienced ones, often misunderstand or overlook important DFM considerations. They may confuse design rules with manufacturing minimums, leading to technically feasible designs that are difficult or costly to produce. In this column, I will clarify some common DFM guidelines and help designers understand the difference between “design rules” and “minimums” while sharing best practices that will simplify the production process and ensure the highest quality PCB.