Segment 9 of Koh Young Webinar Series: Koh Young Auto Programming (KAP)
November 24, 2021 | I-Connect007 Editorial TeamEstimated reading time: Less than a minute

Watch & Learn!
In this engaging, 12-part micro webinar series, Koh Young topic experts Joel Scutchfield and Ivan Aduna examine 3D inspection, AI, CFX, connectivity and smart factory success.
At just over 8 minutes, the ninth episode, “AI in Action” is now available to view.
Designed to complement Koh Young’s I-007eBook, The Printed Circuit Assembler’s Guide to...SMT Inspection, Today, Tomorrow and Beyond, presenters Scutchfield and Aduna share highly focused educational information on the use of data gathered during the inspection process.
In this segment, viewers will learn about 3D profilometry technology and how it converges with Koh Young’s proprietary AI technology to deliver true automatic programming. This geometry-based software solution reduces the programming process to minimize time to production and reduce costs.
This entire webinar series can be viewed in an hour and covers a comprehensive range of topics surrounding 3D inspection and the use of smart data gathered during the inspection process. Most of the 12 segments can be viewed in about five minutes.
Visit “Converting Process Data Into Intelligence” and start watching, free, today!
Suggested Items
Magnalytix and Foresite to Host Technical Webinar on SIR Testing and Functional Reliability
06/26/2025 | MAGNALYTIXMagnalytix, in collaboration with Foresite Inc., is pleased to announce an upcoming one-hour Webinar Workshop titled “Comparing SIR IPC B-52 to Umpire 41 Functional & SIR Test Method.” This session will be held on July 24, 2025, and is open to professionals in electronics manufacturing, reliability engineering, and process development seeking insights into new testing standards for climatic reliability.
The Death of the Microsection
06/26/2025 | Bob Neves, Reliability Assessment Solutions, Inc.I got my start out of college grinding and polishing PCB microsections. My thumbs are a bit arthritic today because of the experience (microsection grinders know what I mean). Back then, via structures were rather large, and getting to the center in six steps of grinding and polishing was easy compared to what my team has been doing recently at the lab.
Specially Developed for Laser Plastic Welding from LPKF
06/25/2025 | LPKFLPKF introduces TherMoPro, a thermographic analysis system specifically developed for laser plastic welding that transforms thermal data into concrete actionable insights. Through automated capture, evaluation, and interpretation of surface temperature patterns immediately after welding, the system provides unprecedented process transparency that correlates with product joining quality and long-term product stability.
Knocking Down the Bone Pile: Tin Whisker Mitigation in Aerospace Applications, Part 3
06/25/2025 | Nash Bell -- Column: Knocking Down the Bone PileTin whiskers are slender, hair-like metallic growths that can develop on the surface of tin-plated electronic components. Typically measuring a few micrometers in diameter and growing several millimeters in length, they form through an electrochemical process influenced by environmental factors such as temperature variations, mechanical or compressive stress, and the aging of solder alloys.
ASC Sunstone Circuits and Screaming Circuits Partner to Launch Online Assembly Parts Ordering – A New Step Toward Seamless PCB Production
06/23/2025 | ASC SunstoneIn a major step toward simplifying the PCB manufacturing and assembly process, ASC Sunstone Circuits and Screaming Circuits are proud to announce the launch of a new online assembly parts ordering feature, now available through Sunstone.com. This enhanced capability allows customers to source assembly components as part of their PCB order, creating a fully integrated experience from bare board fabrication to finished assembly.