Global PCB Connections: Following DFM Rules Leads to Better Boards
Elementary Mr. Watson: How to Reinvent Your Professional Journey
Fresh PCB Concepts: PCB Plating Process Overview
Winonics Department Leaders Successfully Complete IPC-6012 Training
February 24, 2022 | WinonicsEstimated reading time: 1 minute
Winonics announced the successful completion of IPC-6012 training and certification for five upper management personnel and eleven department leaders and lab personnel in their Brea, CA facility. The latest certifications are part of a larger company-wide initiative begun in 2021, with a plan to have all production employees trained and certified by the end of 2022.
With the appointment of David Torp as CEO in 2021, who was formerly the IPC Vice President of Standards and Technology (2007-2014), a directive was established to ensure that the entire Winonics production team would be fully supported and equipped with IPC-6012 and IPC-600 training and certification.
Jordan Wines, Front End Engineering Manager at Winonics, is a certified IPC trainer and is leading the initiative and conducting all in-house training including those completed this week. Wines' approach encompasses a multi-tiered approach that will first certify the engineering team, followed by supervisors, the quality team, the lab team and operators. The result will be that all employees will be able to self-inspect their work at every stage of the process and identify non-conformance issues early in the process when they can be mitigated or corrected. Furthermore, early detection of issues will enable the staff to provide better communication and transparency with customers, preemptively avoid costly failures, and make the overall factory and process flow more efficiently and reliably.
Wil Berube, Head of Quality remarked, "Winonics is committed to ensuring the delivery of quality PCBs on time, every time. Frankly, this is not feasible without ensuring every single person on our production team is trained and certified to industry standards. Unfortunately, this is not the typical practice for most PCB fabricators which inevitably results in a negative and costly impact to product quality and on-time delivery. By investing in our people through IPC training and certification, we will be able to consistently deliver high-quality products on time--setting Winonics apart competitively."
Share on:
Suggested Items
Are Our Stackup Rules No Longer Valid?
12/19/2024 | Cherie Litson, EPTAC MIT CID/CID+Are the stackup rules we used to follow no longer valid? It depends on what you’re designing. Electrical rules change depending on your circuit. Fabrication rules change depending on which fabricator you’re working with. Today, we just have more options, and sometimes, cost is a bigger rule than anything else. If you search online for information about layer stackups, trace widths, and hole sizes in PCBs, you’ll find a variety of resources.
IPC/WHMA Launches Groundbreaking Online Course on Wire Harness Design
12/18/2024 | IPCIPC/WHMA is excited to announce the launch of its new online instructor-led training course, "Introduction to Wire Harness Design I," available now through the IPC EDGE Learning Management System.
IPC Releases Latest List of Standards and Revisions
12/17/2024 | IPC Community Editorial TeamEach quarter, IPC releases a list of standards that are new or have been updated. To view a complete list of newly published standards and standards revisions, translations, proposed standards for ballot, final drafts for industry review, working drafts, and project approvals, visit ipc.org/status. These are the latest releases for Q4 2024.
IPC, FED Partner for New Design Conference in Vienna
12/12/2024 | Andy Shaughnessy, Design007 MagazineIPC and its German partner FED have teamed up to create a new PCB design conference in Vienna, Austria. The Pan-European Electronics Design Conference (PEDC) is scheduled for Jan. 29-30 at the NH Danube City hotel in Vienna. IPC’s Peter Tranitz, one of the show organizers, discussed how this new show came about, pointing out that, unlike many of the regional conferences in Europe, PEDC will host curated, peer-reviewed presentations, not promotional content or product pitches. Will PEDC become an annual event?
Happy’s Tech Talk #35: Yields March to Design Rules
12/12/2024 | Happy Holden -- Column: Happy’s Tech TalkUltra high density interconnect (UHDI) has many forms, structures, and alternatives, so capturing all the variations and reducing them to design rules has required some departures from traditional IPC design standards. In this column, I’ll be discussing the IPC UHDI design guidelines and standards. The fundamental question is: “Do you need HDI or microvias?”