The Knowledge Base: The Era of Advanced Packaging
Standard of Excellence: Finding and Developing Future Leaders in Manufacturing
Global Sourcing Spotlight: Navigating the Variables of Holiday Schedules in Global Sourcing
Indium Corporation Expert Dr. HongWen Zhang to Present at ICEP
March 31, 2022 | Indium CorporationEstimated reading time: 2 minutes
Indium Corporation’s Alloy Group R&D Manager Dr. HongWen Zhang will present on a high-temperature lead-free solder paste at the International Conference on Electronics Packaging (ICEP), supported by the International Microelectronics Assembly and Packaging Society (IMAPS), May 11-14 in Hokkaido, Japan.
The harmful effects of lead on human health and the environment are driving the development of high-temperature lead-free (HTLF) solders to replace high-lead solders for die-attachment and clip-bond in power device applications. In his presentation, A Drop-In High-Temperature Pb-Free Solder Paste Outperforms High-Pb Pastes in Power Discrete Applications, Dr. Zhang examines a new formulation of Indium Corporation’s innovative material Durafuse™—a novel design based on a mixed-alloy technology—designed to deliver an Sn-rich HTLF paste, presenting the merits of both constituent alloys. This product, Durafuse™ HT, has shown the feasibility as a drop-in solution to replace high-Pb solders for die-attach in power discrete applications by delivering improved performance.
Dr. Zhang is manager of the alloy group in Indium Corporation’s R&D department. His focus is on the development of Pb-free solder materials and the associated technologies for high-temperature and high-reliability applications. He was instrumental in inventing the mixed-alloy solder technique to combine the merits of constituents to improve wetting, reduce processing temperatures, modify the bonding surface, and control the joint’s morphology, thus improving reliability.
Dr. Zhang has a bachelor’s degree in metallurgical physical chemistry from Central South University of China, a master’s degree in materials and engineering from the Institute of Metal Research, Chinese Academy of Science, and a master’s degree in mechanical engineering and a Ph.D. in material science and engineering from the Michigan Technological University. He has a Six Sigma Green Belt from the Thayer School of Engineering at Dartmouth College, and is a certified IPC Specialist for IPC-A-600 and IPC-A-610 as well as a certified SMT Process Engineer. He has extensive experience in various aluminum (Al) alloys and fiber/particle reinforced Al-based composite materials, and Al-rich and ZrHf-based amorphous alloys. He has co-authored two book chapters on high-temperature lead-free bonding materials, has had a number of patents filed, and has been published in approximately 20 journals in the fields of metallurgy, materials science and engineering, physics, electronics materials, and mechanics.
Download The Printed Circuit Assembler’s Guide to… Solder Defectsby Christopher Nash and Dr. Ronald C. Lasky. You can also view other titles in our full I-007e Book library here.
Share on:
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Low-Temperature Soldering, Vol. 2, Chapter 5
12/23/2024 | I-Connect007 Editorial TeamChapter 5 introduces the advantages of using low-temperature soldering for through-hole components, including cost efficiency, reliability improvement, and reduced warpage. Also covered: the evaluation of different fluxes and the performance of HRL3 in wave soldering and selective soldering processes.
Overview of Soldering Systems With Vacuum
12/18/2024 | Dr. Paul Wild, Rehm Thermal Systems GmbHWhen soldering electronic assemblies, the focus of the vacuum application is on the removal of volatile substances from the solder joints and the associated reduction of pore formation. Particularly in the thermal management of power electronics components, pores can cause so-called hotspots with higher temperatures due to their poor heat conduction. These hotspots can lead to overheating of the components on the one hand and to thermally induced destruction of the solder structure on the other.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
12/13/2024 | Andy Shaughnessy, I-Connect007This week, Peter Tranitz discusses the upcoming Pan-European Electronics Design Conference, set for Jan. 29-30 in Vienna, Austria. Pete Starkey brings us a review of the most recent EIPC Technical Snapshot webinar, which featured a global PCB maker update by Dr. Hayao Nakahara. Don't miss our interview with Manfred Huschka, who explains how companies can begin their own China Plus One plan. Stan Farnsworth breaks down photonic soldering and discusses its use in soldering materials that are not typically compatible. I also enjoyed Dan Beaulieu’s discussion on the value of consistency, and why just showing up for work is half the battle, especially in an inconsistent, evolving industry like ours.
Advancing Photonic Soldering
12/11/2024 | Nolan Johnson, SMT007 MagazineStan Farnsworth, director of customer satisfaction at PulseForge, discusses the advancements in photonic soldering that highlight its energy efficiency and versatility. Over the past two years, the company has refined its applications for flexible substrates and energy reduction, finding that photonic soldering allows the processing of materials that typically aren’t thermally compatible and offers significant energy savings compared to traditional methods.
Indium Introduces New ROL0 and Halogen-free Flux-cored Wire
12/11/2024 | Indium CorporationIndium Corporation announced the global availability of CW-807RS, a new high-reliability, halide- and halogen-free flux-cored wire that improves wetting speeds and cycle times for electronics assembly and robot soldering applications.